1 commit ad4eb555671d97f96dc56eab55103b1f86874b01
2 Author: Wolfgang Denk <wd@denx.de>
3 Date: Wed Apr 18 14:30:39 2007 +0200
5 MCC200 board: remove warning which is obsolete after PSoC firmware changes
7 Signed-off-by: Wolfgang Denk <wd@denx.de>
9 commit 3747a3f010b2b1442dec3e871c69788b6017aaae
10 Author: Domen Puncer <domen.puncer@telargo.com>
11 Date: Wed Apr 18 12:11:05 2007 +0200
13 [PATCH] icecube/lite5200b: document wakeup from low-power support
15 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
17 commit e673226ff9d6aa91b47ceac74b8c13770b06bb37
18 Author: Stefan Roese <sr@denx.de>
19 Date: Wed Apr 18 12:07:47 2007 +0200
21 ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM
23 Signed-off-by: Stefan Roese <sr@denx.de>
25 commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f
26 Author: Stefan Roese <sr@denx.de>
27 Date: Wed Apr 18 12:05:59 2007 +0200
29 ppc4xx: Add output for bootrom location to 405EZ ports
31 Now 405EZ ports also show upon bootup from which boot device
32 they are configured to boot:
34 U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05)
36 CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz)
37 Bootstrap Option E - Boot ROM Location EBC (32 bits)
38 16 kB I-Cache 16 kB D-Cache
39 Board: Acadia - AMCC PPC405EZ Evaluation Board
41 Signed-off-by: Stefan Roese <sr@denx.de>
43 commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3
44 Author: Domen Puncer <domen.puncer@telargo.com>
45 Date: Mon Apr 16 14:00:13 2007 +0200
47 [PATCH] icecube/lite5200b: wakeup from low-power support
49 U-Boot part of Lite5200b low power mode support.
50 Puts SDRAM out of self-refresh and transfers control to
51 address saved at physical 0x0.
53 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
54 Acked-by: Grant Likely <grant.likely@secretlab.ca>
56 commit 8048cdd56f04a756eeea4951f402bf5cc33785db
57 Author: Wolfgang Denk <wd@denx.de>
58 Date: Sat Apr 14 21:16:54 2007 +0200
62 commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e
63 Author: Heiko Schocher <hs@pollux.denx.de>
64 Date: Sat Apr 14 05:26:48 2007 +0200
66 [Fix] Set the LED status register on the UC101 for the LXT971 PHY.
67 clear the Display after reset.
69 Signed-off-by: Heiko Schocher <hs@denx.de>
71 commit 7882751c78b7ecabfd49b0eff8de27661c71f16c
72 Author: Denis Peter <d.peter@mpl.ch>
73 Date: Fri Apr 13 09:13:33 2007 +0200
75 [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c
77 Fix bug introduced by "Fix get_partition_info() parameter error in all
78 other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented
79 to use diskboot or scsiboot form another device than 0.
81 Signed-off-by: Denis Peter <d.peter@mpl.ch>
83 commit 0b94504d22e70f537c17a0d38c87edb6e370977d
84 Author: Greg Lopp <lopp@pobox.com>
85 Date: Fri Apr 13 08:02:24 2007 +0200
87 [PATCH] Fix use of "void *" for block dev read/write buffer pointers
89 Signed-of-by: Greg Lopp <lopp@pobox.com>
90 Acked-by: Grant Likely <grant.likely@secretlab.ca>
92 commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13
93 Author: Jeffrey Mann <mannj@embeddedplanet.com>
94 Date: Thu Apr 12 14:15:59 2007 +0200
96 ppc4xx: Fix i2c divisor calcularion for PPC4xx
98 This patch fixes changes the i2c_init(...) function to use the function
99 get_OPB_freq() rather than calculating the OPB speed by
100 sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is
101 specific per processor. The prior method was not and so was calculating
102 the wrong speed for some PPC4xx processors.
104 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
105 Signed-off-by: Stefan Roese <sr@denx.de>
107 commit 6c9ba919375db977aaad9146bf320c7afd07ae7a
108 Author: Wolfgang Denk <wd@denx.de>
109 Date: Wed Apr 11 17:25:01 2007 +0200
113 Signed-off-by: Wolfgang Denk <wd@denx.de>
115 commit 51056dd9863e6a1bc363afbbe1775c58cd967418
116 Author: Wolfgang Denk <wd@denx.de>
117 Date: Wed Apr 11 17:22:55 2007 +0200
121 * Make IDE timeout configurable through ide_reset_timeout variable.
122 * Use Newline as "password" string
123 * Use just a single partition in NAND flash
125 commit c0707ce65677650b5ceab0500ee50ae5168afef2
126 Author: Aubrey Li <aubrey.adi@gmail.com>
127 Date: Thu Apr 5 18:34:06 2007 +0800
129 [Blackfin][PATCH] Kill off a bunch of common local prototypes
131 commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d
132 Author: Aubrey Li <aubrey.adi@gmail.com>
133 Date: Thu Apr 5 18:33:04 2007 +0800
135 [Blackfin][PATCH] Fix dynamic CPLB generation issue
137 commit 0445e3a264251d75b1be45ef713c70726a2952f0
138 Author: Aubrey Li <aubrey.adi@gmail.com>
139 Date: Thu Apr 5 18:31:47 2007 +0800
141 [Blackfin][PATCH] minior cleanup
143 commit 155fd766573981090e638b493d5857562151862e
144 Author: Aubrey Li <aubrey.adi@gmail.com>
145 Date: Thu Apr 5 18:31:18 2007 +0800
147 [Blackfin][PATCH] Fix copyright and update license
149 commit 9fd437bbd75d282f899e1da50be20a2bf38450bc
150 Author: Aubrey Li <aubrey.adi@gmail.com>
151 Date: Thu Apr 5 18:30:25 2007 +0800
153 [Blackfin][PATCH] Add BF537 EMAC driver initialization
155 commit 889256e8604e0c68db1d866d720894dffede9df6
156 Author: Aubrey Li <aubrey.adi@gmail.com>
157 Date: Thu Apr 5 18:29:55 2007 +0800
159 [Blackfin][PATCH] call real the system synchronize instruction
161 commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05
162 Author: Aubrey Li <aubrey.adi@gmail.com>
163 Date: Thu Apr 5 18:29:17 2007 +0800
165 [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it
167 commit dfeeab2cd680df047e68e723b246adf6f33bb556
168 Author: Aubrey Li <aubrey.adi@gmail.com>
169 Date: Thu Apr 5 18:28:34 2007 +0800
171 [Blackfin][PATCH]: fix flash unaligned copy issue
173 commit 31c98a88228021b314c89ebb8104fb6473da4471
174 Author: Wolfgang Denk <wd@denx.de>
175 Date: Wed Apr 4 02:09:30 2007 +0200
177 Minor coding style cleanup.
179 commit 94abd7c0583ebe01e799b25f451201deeaab550d
180 Author: Wolfgang Denk <wd@denx.de>
181 Date: Wed Apr 4 01:49:15 2007 +0200
185 commit a65c5768e5537530bd1780af3d3fddc3113a163c
186 Author: Stefan Roese <sr@denx.de>
187 Date: Mon Apr 2 10:09:30 2007 +0200
189 ppc4xx: Change SysACE address on Katmai
191 With this new base address of the Xilinx SystemACE controller
192 the Linux driver will be easier to adapt, since it can now be
193 mapped via the "normal" ioremap() call.
195 Signed-off-by: Stefan Roese <sr@denx.de>
197 commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73
198 Author: Gerald Van Baren <vanbaren@cideas.com>
199 Date: Sat Mar 31 14:30:53 2007 -0400
201 Fix some minor whitespace violations.
203 commit 213bf8c822de8eecaf69860684469cdaba2e9e6a
204 Author: Gerald Van Baren <vanbaren@cideas.com>
205 Date: Sat Mar 31 12:23:51 2007 -0400
207 Add a flattened device tree (fdt) command (2 of 2)
209 Modifications to the existing code to support the new fdt command.
211 commit 781e09ee6e3e3e392ab362c1f0ef1068adc76e3e
212 Author: Gerald Van Baren <vanbaren@cideas.com>
213 Date: Sat Mar 31 12:22:10 2007 -0400
215 Add a flattened device tree (fdt) command (1 of 2)
217 The fdt command uses David Gibson's libfdt library to manipulate as well
218 as print the flattened device tree. This patch is the new command,
219 the second part is the modifications to the existing code.
221 commit 3af0d587d93e0be5f96e1b30fa41e662f8b0803e
222 Author: Gerald Van Baren <vanbaren@cideas.com>
223 Date: Sat Mar 31 12:13:43 2007 -0400
225 libfdt: Enhanced and published fdt_next_tag()
227 Enhanced the formerly private function _fdt_next_tag() to allow stepping
228 through the tree, used to produce a human-readable dump, and made
229 it part of the published interface.
230 Also added some comments.
232 commit fa3a74cec73dfd06a5ae35a9a3368200273aaa71
233 Author: Gerald Van Baren <vanbaren@cideas.com>
234 Date: Sat Mar 31 12:05:39 2007 -0400
236 libfdt: Customizations for use by u-boot.
238 Changes to David Gibson's original source to fit into u-boot's
239 environment. No functionality changes.
241 commit 35748177c64a4a83a00057e93bb33e40278a2a96
242 Author: Gerald Van Baren <vanbaren@cideas.com>
243 Date: Sat Mar 31 12:00:56 2007 -0400
245 libfdt: Import libfdt source (2 of 2)
247 This adds the applicable libfdt source files (unmodified) and a README
248 to explain where the source came from.
250 commit 7cd5da0fe877e7171a4cdd44880bce783132871a
251 Author: Gerald Van Baren <vanbaren@cideas.com>
252 Date: Sat Mar 31 11:59:59 2007 -0400
254 libfdt: Import libfdt source (1 of 2)
256 This adds the applicable libfdt source files (unmodified) and a README
257 to explain where the source came from.
259 commit da6ebc1bc082cbe3b6bbde079cafe09f7ebbad4b
260 Author: Stefan Roese <sr@denx.de>
261 Date: Sat Mar 31 13:16:23 2007 +0200
263 ppc4xx: Update Katmai bootstrap command
265 Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB
268 Signed-off-by: Stefan Roese <sr@denx.de>
270 commit cabee756a6532986729477c3cc1ea16ef8517ad2
271 Author: Stefan Roese <sr@denx.de>
272 Date: Sat Mar 31 13:15:06 2007 +0200
274 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
276 Additional RAM information is now printed upon powerup, like
277 DDR2 frequency and CAS latency.
279 Signed-off-by: Stefan Roese <sr@denx.de>
281 commit 60723803431ac75cad085690789e433d5ab9174e
282 Author: Stefan Roese <sr@denx.de>
283 Date: Sat Mar 31 08:48:36 2007 +0200
285 ppc4xx: Change Yucca config file to support ECC
287 With the updated 44x DDR2 driver the Yucca board now supports
288 ECC generation and checking.
290 Signed-off-by: Stefan Roese <sr@denx.de>
292 commit 490e5730c674b20d708b783a2c5ffd7208f83873
293 Author: Stefan Roese <sr@denx.de>
294 Date: Sat Mar 31 08:47:34 2007 +0200
296 ppc4xx: Fix "bootstrap" command for Katmai board
298 The board specific "bootstrap" command is now fixed and can
299 be used for the AMCC Katmai board to configure different
300 CPU/PLB/OPB frequencies.
302 Signed-off-by: Stefan Roese <sr@denx.de>
304 commit 94f54703c3a776ec23e427ca2a16e0a79a5d50c1
305 Author: Stefan Roese <sr@denx.de>
306 Date: Sat Mar 31 08:46:08 2007 +0200
308 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
310 Fix a bug in the auto calibration routine. This driver now runs
311 more reliable with the tested modules. It's also tested with
312 167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai.
314 Signed-off-by: Stefan Roese <sr@denx.de>
316 commit 342cd097be1e7affe82f42ab3da220959a699e64
317 Author: Michal Simek <monstr@monstr.eu>
318 Date: Fri Mar 30 22:52:09 2007 +0200
320 [PATCH] Clean include dependence
322 commit 6f934210fb293fde2cfb4251c6d96fdc58b6a906
323 Author: Michal Simek <monstr@monstr.eu>
324 Date: Fri Mar 30 22:42:45 2007 +0200
326 [CLEAN] Remove inefficient Suzaku code
328 commit 430f1b0f9a670c2f13eaa52e66a10db96dd3647d
329 Author: Stefan Roese <sr@denx.de>
330 Date: Wed Mar 28 15:03:16 2007 +0200
332 Merge some AMCC make targets to keep the top-level Makefile smaller
334 Signed-off-by: Stefan Roese <sr@denx.de>
336 commit 0c75c9d84307a9f1cbe1ff0c4d8937ee3a96475e
337 Author: Stefan Roese <sr@denx.de>
338 Date: Wed Mar 28 14:52:12 2007 +0200
340 i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined
342 The "old" i2c commands (iprobe, imd...) are now compiled in again,
343 even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE
346 Signed-off-by: Stefan Roese <sr@denx.de>
348 commit 5da048adf44bea5e3b94080d02903c2e3fe7aa4a
349 Author: Michal Simek <monstr@monstr.eu>
350 Date: Tue Mar 27 00:32:16 2007 +0200
352 PATCH: Resolve GPL license problem
354 commit 1798049522f594013aea29457d46794298c6ae15
355 Author: Michal Simek <root@monstr.eu>
356 Date: Mon Mar 26 01:39:07 2007 +0200
358 Support for XUPV2P board
360 BSP autoconfig support
362 commit 0d974d5297349504a2ddfa09314be573b5df320a
363 Author: Stefan Roese <sr@denx.de>
364 Date: Sat Mar 24 15:57:09 2007 +0100
366 [PATCH] Add 4xx GPIO functions
368 This patch adds some 4xx GPIO functions. It also moves some of the
369 common code and defines into a common 4xx GPIO header file.
371 Signed-off-by: Stefan Roese <sr@denx.de>
373 commit 2db633658bbf366ab0c8dad7a0727e1fb2ae6b11
374 Author: Stefan Roese <sr@denx.de>
375 Date: Sat Mar 24 15:55:58 2007 +0100
377 [PATCH] Small Sequoia cleanup
379 Signed-off-by: Stefan Roese <sr@denx.de>
381 commit 3cb86f3e40d2a80356177434a99f75bc8baa9caf
382 Author: Stefan Roese <sr@denx.de>
383 Date: Sat Mar 24 15:45:34 2007 +0100
385 [PATCH] Clean up 40EZ/Acadia support
387 This patch cleans up all the open issue of the preliminary
390 Signed-off-by: Stefan Roese <sr@denx.de>
392 commit 6eb1df835191d8ce4b81d5af40fa8e0fbe78e997
393 Author: Jon Loeliger <jdl@freescale.com>
394 Date: Tue Dec 12 11:02:20 2006 -0600
396 Fix 8641HPCN problem with ld version 2.16
398 (Dot outside sections problem).
400 This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540.
402 Signed-off-by: Jon Loeliger <jdl@freescale.com>
404 commit 9964a4dd0d4ef5a037febaebf1aa494b1a72991c
405 Author: Haiying Wang <haiying.wang@freescale.com>
406 Date: Thu Dec 7 10:35:55 2006 -0600
408 Set Rev 2.x 86xx PIC in mixed mode.
410 Prevent false interrupt from hanging Linux as MSR[EE] is set
411 to enable interrupts by changing the PIC out of the default
412 pass through mode into mixed mode.
414 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
415 Signed-off-by: Jon Loeliger <jdl@freescale.com>
417 commit 5a58a73ceb0a4059c42ef64cedbc1a45e0aaa00e
418 Author: Jason Jin <jason.jin@freescale.com>
419 Date: Thu Dec 7 10:32:35 2006 -0600
421 Add flash cmd function to 8641HPCN ramboot
423 Also fixes some commmand for 8641 HPCN ramboot case.
425 Signed-off-by: Jason Jin <jason.jin@freescale.com>
426 Signed-off-by: Jon Loeliger <jdl@freescale.com>
428 commit 2ccceacc04b009d923afb7c26189ba2f8a2a5d46
429 Author: Ed Swarthout <ed.swarthout@freescale.com>
430 Date: Thu Dec 7 10:34:14 2006 -0600
432 Add support for 8641 Rev 2 silicon.
434 Without this patch, I am unable to get to the prompt on rev 2 silicon.
435 Only set ddrioovcr for rev1.
437 Signed-off-by: Ed Swarthout<ed.swarthout@freescale.com>
438 Signed-off-by: Jon Loeliger <jdl@freescale.com>
440 commit 44ba464b99001f8bd1c456a1e9d59726252f707a
441 Author: Wolfgang Denk <wd@denx.de>
442 Date: Thu Mar 22 00:13:12 2007 +0100
444 Code cleanup / re-insert previous Copyright entries.
446 Signed-off-by: Wolfgang Denk <wd@denx.de>
448 commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302
449 Author: Wolfgang Denk <wd@denx.de>
450 Date: Wed Mar 21 23:26:15 2007 +0100
452 Code cleanup. Update CHANGELOG
454 commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286
455 Author: Stefan Roese <sr@denx.de>
456 Date: Wed Mar 21 14:54:29 2007 +0100
458 ppc4xx: Fix file mode of include/configs/acadia.h
460 Signed-off-by: Stefan Roese <sr@denx.de>
462 commit d5f4614c9350d9333e575100fb250aab774d0258
463 Author: Markus Klotzbuecher <mk@denx.de>
464 Date: Wed Mar 21 14:41:46 2007 +0100
466 SPC1920: fix small clock routing bug
468 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
470 commit 16c0cc1c82081a493ab87c51980b28336ce1bce8
471 Author: Stefan Roese <sr@denx.de>
472 Date: Wed Mar 21 13:39:57 2007 +0100
474 [PATCH] Add AMCC Acadia (405EZ) eval board support
476 This patch adds support for the new AMCC Acadia eval board.
478 Please note that this Acadia/405EZ support is still in a beta stage.
479 Still lot's of cleanup needed but we need a preliminary release now.
481 Signed-off-by: Stefan Roese <sr@denx.de>
483 commit e01bd218b00af73499331a1a701625a852cd286f
484 Author: Stefan Roese <sr@denx.de>
485 Date: Wed Mar 21 13:38:59 2007 +0100
487 [PATCH] Add AMCC PPC405EZ support
489 This patch adds support for the new AMCC 405EZ PPC. It is in
490 preparation for the AMCC Acadia board support.
492 Please note that this Acadia/405EZ support is still in a beta stage.
493 Still lot's of cleanup needed but we need a preliminary release now.
495 Signed-off-by: Stefan Roese <sr@denx.de>
497 commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1
498 Author: Heiko Schocher <hs@pollux.denx.de>
499 Date: Wed Mar 21 08:45:17 2007 +0100
501 [PATCH] TQM8272: dont change the bits given from the HRCW
502 for the SIUMCR and BCR Register.
503 Fix the calculation for the EEprom Size
505 Signed-off-by: Heiko Schocher <hs@denx.de>
507 commit 654589873dbafcf104dff133ce0d03a4506e9cc3
508 Author: Aubrey Li <aubrey.adi@gmail.com>
509 Date: Tue Mar 20 18:16:24 2007 +0800
511 [Blackfin][PATCH] Add BF561 EZKIT board support
513 commit a6154fd1cfd020f6da8527e0365b1020a11a71d0
514 Author: Aubrey Li <aubrey.adi@gmail.com>
515 Date: Mon Mar 19 22:55:58 2007 +0800
517 [Blackfin][PATCH] minor cleanup
519 commit 389b6bb50f745bf5038ce030300d8a8512e96f79
520 Author: Wolfgang Denk <wd@denx.de>
521 Date: Mon Mar 19 13:10:08 2007 +0100
523 Remove obsoleted POST files.
525 Signed-off-by: Wolfgang Denk <wd@denx.de>
527 commit 8e709bbb2636b5670a8f2b575e138eb1f55773f6
528 Author: Aubrey Li <aubrey.adi@gmail.com>
529 Date: Mon Mar 19 01:26:11 2007 +0800
531 [PATCH] Add flash chip M29W320ET/B support
533 commit 26bf7deca364a5b33f39e8f14ddd3f4081345015
534 Author: Aubrey Li <aubrey.adi@gmail.com>
535 Date: Mon Mar 19 01:24:52 2007 +0800
537 [Blackfin][PATCH] Add BF537 stamp board support
539 commit 8423e5e31a7235d05a482627315fb11d49c17bd7
540 Author: Stefan Roese <sr@denx.de>
541 Date: Fri Mar 16 21:11:42 2007 +0100
543 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board
545 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
546 DDR memory are dynamically programmed matching the total size
547 of the equipped memory (DIMM modules).
549 Signed-off-by: Stefan Roese <sr@denx.de>
551 commit 76d1466f918b881cda2d259254761e73885093c2
552 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
553 Date: Tue Mar 13 13:38:05 2007 +0100
555 [PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405
556 boards in terms of unification.
558 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
560 commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0
561 Author: Wolfgang Denk <wd@denx.de>
562 Date: Tue Mar 13 16:05:55 2007 +0100
564 Make SC3 board build with 'make O='; use 'addcons' consistently
565 (SC3 and Jupiter used to use 'addcon' instead).
567 Signed-off-by: Wolfgang Denk wd@denx.de
569 commit 8502e30a28e492c756ea2d7df0ace026388fce4b
570 Author: Heiko Schocher <hs@pollux.denx.de>
571 Date: Tue Mar 13 09:40:59 2007 +0100
573 [PATCH] update board config for jupiter Board:
575 CONFIG_CMDLINE_EDITING,
576 CFG_ENV_ADDR_REDUND activated
578 Signed-off-by: Heiko Schocher <hs@denx.de>
580 commit 0d93de11449390a5984b0236c3612e50f6dbb7e8
581 Author: Aubrey Li <aubrey.adi@gmail.com>
582 Date: Mon Mar 12 12:11:55 2007 +0800
584 [Blackfin][PATCH] minor cleanup
586 commit bfa5754a58477ac917d21527cd0f079d87cf188e
587 Author: Aubrey Li <aubrey.adi@gmail.com>
588 Date: Mon Mar 12 01:42:06 2007 +0800
590 [Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue
592 commit 8440bb14581a294375c34b91b42512f9753d1130
593 Author: Aubrey Li <aubrey.adi@gmail.com>
594 Date: Mon Mar 12 00:25:14 2007 +0800
596 [Blackfin][PATCH] code cleanup
598 commit cfc67116a706fd18b8f6a9c11a16753c5626d689
599 Author: Michal Simek <monstr@monstr.eu>
600 Date: Sun Mar 11 13:48:24 2007 +0100
602 [Microblaze][PATCH] part 2
604 interrupt controller support
608 board information support
610 booting image support
612 adding support for Xilinx ML401
614 commit 76316a318de91f6184e7c22a10e02d275ade2441
615 Author: Michal Simek <monstr@monstr.eu>
616 Date: Sun Mar 11 13:42:58 2007 +0100
620 interrupt controller support
624 board information support
626 booting image support
628 adding support for Xilinx ML401
630 commit 8db13d63157811c839d15a313d9f2d2f5fd10af3
631 Author: Aubrey Li <aubrey.adi@gmail.com>
632 Date: Sat Mar 10 23:49:29 2007 +0800
634 [Blackfin][PATCH] code cleanup
636 commit ef26a08fef928b7bc11ae2c109e638dc3a016d91
637 Author: Aubrey.Li <aubrey.adi@gmail.com>
638 Date: Fri Mar 9 13:40:56 2007 +0800
640 [Blackfin][PATCH-2/2] Common files changed to support bf533 platform
642 commit 3f0606ad0b5639f7f22848fe5b4574e754d0470f
643 Author: Aubrey.Li <aubrey.adi@gmail.com>
644 Date: Fri Mar 9 13:38:44 2007 +0800
646 [Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support
648 commit 992423ab43c2bcf6b704853bd00af77450915e20
649 Author: Stefan Roese <sr@denx.de>
650 Date: Thu Mar 8 23:00:08 2007 +0100
652 ppc4xx: Fix file mode of sequoia.c
654 Signed-off-by: Stefan Roese <sr@denx.de>
656 commit eb92f613556800f7483666db09d9a237ad911d4a
657 Author: Wolfgang Denk <wd@pollux.denx.de>
658 Date: Thu Mar 8 22:52:51 2007 +0100
662 commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1
663 Author: John Otken john@softadvances.com <john@softadvances.com>
664 Date: Thu Mar 8 09:39:48 2007 -0600
666 ppc4xx: Clear Sequoia/Rainier security engine reset bits
668 Signed-off-by: John Otken john@softadvances.com <john@softadvances.com>
670 commit 650a330dd2539130c8c324791e2f9f75aed79d4e
671 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
672 Date: Thu Mar 8 16:26:52 2007 +0100
674 [PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules
676 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
678 commit d9fc703246840c4b268debf48c334ba55c597dc0
679 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
680 Date: Thu Mar 8 16:25:47 2007 +0100
682 [PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined
684 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
686 commit ced5b9029043397348cdc88e0cfcd6b1f629250b
687 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
688 Date: Thu Mar 8 16:23:11 2007 +0100
690 [PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS
692 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
694 commit d8a8ea5c476d37006fc7f85b7f903142795c8b14
695 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
696 Date: Thu Mar 8 16:20:32 2007 +0100
698 [PATCH] I2C: Add missing default CFG_SPD_BUS_NUM
700 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
702 commit f9fc6a5852a6335840882fa2111925010eea1abe
703 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
704 Date: Wed Mar 7 15:32:01 2007 +0100
706 fixed ethernet phy configuration for plu405 board
708 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
710 commit 769104c9356594deb2092e204a39c05b33202d6c
711 Author: Wolfgang Denk <wd@pollux.denx.de>
712 Date: Thu Mar 8 21:49:27 2007 +0100
716 commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa
717 Author: Stefan Roese <sr@denx.de>
718 Date: Thu Mar 8 10:13:16 2007 +0100
720 [PATCH] Update AMCC Luan 440SP eval board support
722 The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR
723 inititializition. This includes DDR auto calibration and support
724 for different DIMM modules, instead of the fixed setup used in
727 This patch also enables the cache in FLASH for the startup
728 phase of U-Boot (while running from FLASH). After relocating to
729 SDRAM the cache is disabled again. This will speed up the boot
730 process, especially the SDRAM setup, since there are some loops
731 for memory testing (auto calibration).
733 Signed-off-by: Stefan Roese <sr@denx.de>
735 commit 2f5df47351910a2936c7741cf111855829200943
736 Author: Stefan Roese <sr@denx.de>
737 Date: Thu Mar 8 10:10:18 2007 +0100
739 [PATCH] Update AMCC Yucca 440SPe eval board support
741 The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR
742 inititializition. This includes DDR auto calibration and support
743 for different DIMM modules, instead of the fixed setup used in
746 Signed-off-by: Stefan Roese <sr@denx.de>
748 commit 2721a68a9ea91f1e494649ce68b2577261f578e2
749 Author: Stefan Roese <sr@denx.de>
750 Date: Thu Mar 8 10:07:18 2007 +0100
752 ppc4xx: Small AMCC Katmai 440SPe update
754 Signed-off-by: Stefan Roese <sr@denx.de>
756 commit df294497479b1dca6dd86318b2a912f72fede0df
757 Author: Stefan Roese <sr@denx.de>
758 Date: Thu Mar 8 10:06:09 2007 +0100
760 ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP
762 Signed-off-by: Stefan Roese <sr@denx.de>
764 commit fa1aef15bcd47736687be1af544506e90fba545d
765 Author: Stefan Roese <sr@denx.de>
766 Date: Wed Mar 7 16:43:00 2007 +0100
768 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board
770 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
771 DDR memory are dynamically programmed matching the total size
772 of the equipped memory (DIMM modules).
774 Signed-off-by: Stefan Roese <sr@denx.de>
776 commit e2ebe696818939e2b974628be9c921ea3fe9de13
777 Author: Stefan Roese <sr@denx.de>
778 Date: Wed Mar 7 16:39:36 2007 +0100
780 [PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's
782 This patch fixes a problem that occurs when 2 DIMM's are
783 used. This problem was first spotted and fixed by Gerald Jackson
784 <gerald.jackson@reaonixsecurity.com> but this patch fixes the
785 problem in a little more clever way.
787 This patch also adds the nice functionality to dynamically
788 create the TLB entries for the SDRAM (tlb.c). So we should
789 never run into such problems with wrong (too short) TLB
790 initialization again on these platforms.
792 As this feature is new to the "old" 44x SPD DDR driver, it
793 has to be enabled via the CONFIG_PROG_SDRAM_TLB define.
795 Signed-off-by: Stefan Roese <sr@denx.de>
797 commit 39218433983417b9df087976a79e3f80dd5e83d6
798 Author: Wolfgang Denk <wd@denx.de>
799 Date: Wed Mar 7 16:33:44 2007 +0100
801 UC101: fix compiler warnings
803 commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce
804 Author: Wolfgang Denk <wd@pollux.denx.de>
805 Date: Wed Mar 7 16:19:46 2007 +0100
807 HMI1001: fix build error, cleanup compiler warnings.
809 commit ad5bb451ade552c44bef9119d907929ebc2c126f
810 Author: Wolfgang Denk <wd@pollux.denx.de>
811 Date: Tue Mar 6 18:08:43 2007 +0100
813 Restructure POST directory to support of other CPUs, boards, etc.
815 commit a5284efd125967675b2e9c6ef7b95832268ad360
816 Author: Wolfgang Denk <wd@pollux.denx.de>
817 Date: Tue Mar 6 18:01:47 2007 +0100
819 Fix HOSTARCH handling.
820 Patch by Mike Frysinger, Mar 05 2007
822 commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44
823 Author: Stefan Roese <sr@denx.de>
824 Date: Tue Mar 6 07:47:04 2007 +0100
826 [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup
828 As provided by the AMCC applications team, this patch optimizes the
829 DDR2 setup for 166MHz bus speed. The values provided are also save
830 to use on a "normal" 133MHz PLB bus system. Only the refresh counter
831 setup has to be adjusted as done in this patch.
833 For this the NAND booting version had to include the "speed.c" file
834 from the cpu/ppc4xx directory. With this addition the NAND SPL image
835 will just fit into the 4kbytes of program space. gcc version 4.x as
836 provided with ELDK 4.x is needed to generate this optimized code.
838 Signed-off-by: Stefan Roese <sr@denx.de>
840 commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148
841 Author: Kim Phillips <kim.phillips@freescale.com>
842 Date: Wed Feb 28 00:02:04 2007 -0600
844 mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings
846 (cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit)
848 commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf
849 Author: Kumar Gala <galak@kernel.crashing.org>
850 Date: Tue Feb 27 23:51:42 2007 -0600
852 mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode
854 The config value for:
862 Were not being used when setting the appropriate register
870 To allow full config of the SCCR.
872 Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349
873 that were just bogus.
875 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
877 commit d51b3cf371cd441030460ef19d36b2924c361b1a
878 Author: Kim Phillips <kim.phillips@freescale.com>
879 Date: Thu Feb 22 20:06:57 2007 -0600
881 mpc83xx: update [local-]mac-address properties on UEC based devices
883 8360 and 832x weren't updating their [local-]mac-address
884 properties. This patch fixes that.
886 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
888 commit 61f4f912acbe60776c5e00df1ec94094ce672957
889 Author: Timur Tabi <timur@freescale.com>
890 Date: Tue Feb 13 10:41:42 2007 -0600
892 mpc83xx: write MAC address to mac-address and local-mac-address
894 Some device trees have a mac-address property, some have local-mac-address,
895 and some have both. To support all of these device trees, this patch
896 updates ftp_cpu_setup() to write the MAC address to mac-address if it exists.
897 This function already updates local-mac-address.
899 Signed-off-by: Timur Tabi <timur@freescale.com>
901 commit 22d71a71f57fd5d38b27ac3848e50d790360a598
902 Author: Kim Phillips <kim.phillips@freescale.com>
903 Date: Tue Feb 27 18:41:08 2007 -0600
905 mpc83xx: add command line editing by default
907 commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca
908 Author: Kim Phillips <kim.phillips@freescale.com>
909 Date: Wed Feb 14 19:50:53 2007 -0600
911 mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers
913 Disable G1TXCLK, G2TXCLK h/w buffers. This patch
914 fixes a networking timeout issue with MPC8360EA (Rev.2) PBs.
916 Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards.
918 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
919 Signed-off-by: Emilian Medve <Emilian.Medve@freescale.com>
921 commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f
922 Author: Xie Xiaobo <r63061@freescale.com>
923 Date: Wed Feb 14 18:27:17 2007 +0800
925 mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx
927 The code supply fixed and SPD initialization for MPC83xx DDR2 Controller.
928 it pass DDR/DDR2 compliance tests.
930 Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
932 commit b110f40bd180c6b560276589beedf753e97c46ce
933 Author: Xie Xiaobo <r63061@freescale.com>
934 Date: Wed Feb 14 18:27:06 2007 +0800
936 mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS
938 MPC8360E rev2.0 have new spridr,and PVR value,
939 The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM.
941 Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
943 commit 8d172c0f0d85998a256a95b7459a5403a30380ed
944 Author: Xie Xiaobo <r63061@freescale.com>
945 Date: Wed Feb 14 18:26:44 2007 +0800
947 mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS
949 MPC8349E rev3.1 have new spridr,and PVR value,
950 The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM.
952 Signed-off-by: Xie Xiaobo<X.Xie@freescale.com>
954 commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b
955 Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
956 Date: Wed Jan 31 11:04:19 2007 +0100
958 mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c
960 Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0)
961 which is used to se if an slave will ACK after receiving its address.
963 Correct i2c probing to use this method as the old method could upset
964 a slave as it wrote a data byte to it.
966 Add a small delay in i2c_init() to let the controller
967 shutdown any ongoing I2C activity.
969 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
971 commit 7a78f148d6a7298e4fface680dc7eacd877b1aba
972 Author: Timur Tabi <timur@freescale.com>
973 Date: Wed Jan 31 15:54:29 2007 -0600
975 mpc83xx: Add support for the MPC8349E-mITX-GP
977 Add support for the MPC8349E-mITX-GP, a stripped-down version of the
978 MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in
979 HRCW is 0) for the ITX and a README for the ITX and the ITX-GP.
981 Signed-off-by: Timur Tabi <timur@freescale.com>
983 commit fab16807adad350f618024350c6950165c247c72
984 Author: Timur Tabi <timur@freescale.com>
985 Date: Wed Jan 31 15:54:20 2007 -0600
987 mpc83xx: Delete sdram_init() for MPC8349E-mITX
989 There is no SDRAM on any of the 8349 ITX variants, so function sdram_init()
990 never does anything. This patch deletes it.
992 Signed-off-by: Timur Tabi <timur@freescale.com>
994 commit a87c856eb411b9365937d0d4b9c21e46adbe1c14
995 Author: Dave Liu <daveliu@freescale.com>
996 Date: Fri Jan 19 10:43:26 2007 +0800
998 mpc83xx: Fix the LAW1/3 bug
1000 The patch solves the alignment problem of the local bus access windows to
1001 render accessible the memory bank and PHY registers of UPC 1 (starting at
1002 0xf801 0000). What we actually did was to adjust the sizes of the bus
1003 access windows so that the base address alignment requirement would be met.
1005 Signed-off-by: Chereji Marian <marian.chereji@freescale.com>
1006 Signed-off-by: Gridish Shlomi <gridish@freescale.com>
1007 Signed-off-by: Dave Liu <daveliu@freescale.com>
1009 commit 97c4b397dce236a7318b304667bf89e59d08b17c
1010 Author: Kim Phillips <kim.phillips@freescale.com>
1011 Date: Tue Jan 30 16:15:31 2007 -0600
1013 mpc83xx: don't hang if watchdog configured on 8360, 832x
1015 don't hang if watchdog configured on 8360, 832x
1017 The watchdog programming model is the same across all 83xx devices;
1018 make the code reflect that.
1020 commit b70047478570e371ce7223be342ce98afea0f7d6
1021 Author: Kim Phillips <kim.phillips@freescale.com>
1022 Date: Tue Jan 30 16:15:21 2007 -0600
1024 mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt
1026 protect memcpy to bad address if a local-mac-address is missing from dt
1028 commit 6752ed088c75c26a89b70c46b7326a4cd6015f29
1029 Author: Kim Phillips <kim.phillips@freescale.com>
1030 Date: Tue Jan 30 16:15:04 2007 -0600
1032 mpc83xx: make 8360 default environment fdt be 8360 (not 8349)
1034 make 8360 default environment fdt be 8360 (not 8349)
1036 commit a28899c910024a0226331df07207b1038c300c93
1037 Author: Emilian Medve <Emilian.Medve@freescale.com>
1038 Date: Tue Jan 30 16:14:50 2007 -0600
1040 mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC
1042 The problem is not gcc4 but the code itself. The BD_STATUS() macro can't
1043 be used for busy-waiting since it strips the 'volatile' property from
1044 the bd variable. gcc3 was working by pure luck.
1046 This is a follow on patch to "Fix the UEC driver bug of QE"
1048 commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89
1049 Author: Kumar Gala <galak@kernel.crashing.org>
1050 Date: Tue Jan 30 14:08:30 2007 -0600
1052 mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead
1054 The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all
1055 MPC834X class processors. Change the protections from CONFIG_MPC8349 to
1056 CONFIG_MPC834X so they are more generic.
1058 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1060 commit ae246dc6c1937c291014eadd90b6d48c438c7cb0
1061 Author: Kim Phillips <kim.phillips@freescale.com>
1062 Date: Thu Jan 25 13:40:55 2007 -0600
1064 mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL
1066 commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb
1067 Author: Kim Phillips <kim.phillips@freescale.com>
1068 Date: Wed Jan 24 17:18:37 2007 -0600
1070 mpc83xx: sort Makefile targets
1072 reordered targets alphabetically
1074 commit 91e25769771c1164ed63ffca0add49f934ae3343
1075 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
1076 Date: Tue Jan 16 11:38:14 2007 -0500
1078 mpc83xx: U-Boot support for Wind River SBC8349
1080 I've redone the SBC8349 support to match git-current, which
1081 incorporates all the MPC834x updates from Freescale since the 1.1.6
1082 release, including the DDR changes.
1084 I've kept all the SBC8349 files as parallel as possible to the
1085 MPC8349EMDS ones for ease of maintenance and to allow for easy
1086 inspection of what was changed to support this board. Hence the SBC8349
1087 U-Boot has FDT support and everything else that the MPC8349EMDS has.
1089 Fortunately the Freescale updates added support for boards using CS0,
1090 but I had to change spd_sdram.c to allow for board specific settings for
1091 the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
1092 default if the board doesn't specify a value.)
1094 Hopefully this should be mergeable as-is and require no whitespace
1095 cleanups or similar, but if something doesn't measure up then let me
1096 know and I'll fix it.
1101 commit 05031db456ab227f3e3752f37b9b812b65bb83ad
1102 Author: Sam Song <samsongshu@yahoo.com.cn>
1103 Date: Thu Dec 14 19:03:21 2006 +0800
1105 mpc83xx: Remove a redundant semicolon in mpc8349itx.c
1107 A redundant semicolon existed in mpc8349itx.c
1110 Signed-off-by: Sam Song <samsongshu@yahoo.com.cn>
1112 commit f35f358241c549be3f75cfe2eaa642914275b7ba
1113 Author: Jerry Van Baren <gerald.vanbaren@comcast.net>
1114 Date: Wed Dec 6 21:23:55 2006 -0500
1116 mpc83xx: Put the version (and magic) after the HRCW.
1118 Put the version (and magic) after the HRCW. This puts it in a fixed
1119 location in flash, not at the start of flash but as close as we can get.
1121 Signed-off-by: Jerry Van Baren <vanbaren@cideas.com>
1123 commit 48aecd969171a6e99a55fae04933857787f9a5bd
1124 Author: Dave Liu <r63238@freescale.com>
1125 Date: Thu Dec 7 21:14:51 2006 +0800
1127 mpc83xx: Add the MPC832XEMDS board readme
1129 Add the MPC832XEMDS board readme
1131 Signed-off-by: Dave Liu <daveliu@freescale.com>
1133 commit 24c3aca3f1358b113d3215adb5433b156e99f72b
1134 Author: Dave Liu <r63238@freescale.com>
1135 Date: Thu Dec 7 21:13:15 2006 +0800
1137 mpc83xx: Add support for the MPC832XEMDS board
1139 This patch supports DUART, ETH3/4 and PCI etc.
1141 Signed-off-by: Dave Liu <daveliu@freescale.com>
1143 commit e080313c32322e15ab5a18eb896a252858c57284
1144 Author: Dave Liu <r63238@freescale.com>
1145 Date: Thu Dec 7 21:11:58 2006 +0800
1147 mpc83xx: streamline the 83xx immr head file
1149 For better format and style, I streamlined the 83xx head files,
1150 including immap_83xx.h and mpc83xx.h. In the old head files, 1)
1151 duplicated macro definition appear in the both files; 2) the structure
1152 of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The
1153 macro definition put inside the each structure. So, I cleaned up the
1154 structure of QE immr from immap_83xx.h, deleted the duplicated stuff and
1155 moved the macro definition to mpc83xx.h, Just like MPC8260.
1159 *streamline the 83xx immr head file
1161 Signed-off-by: Dave Liu <daveliu@freescale.com>
1163 commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0
1164 Author: Dave Liu <r63238@freescale.com>
1165 Date: Wed Dec 6 11:38:17 2006 +0800
1167 mpc83xx: Fix the UEC driver bug of QE
1169 The patch prevents the GCC tool chain from striping useful code for
1170 optimization. It will make UEC ethernet driver workable, Otherwise the
1171 UEC will fail in tx when you are using gcc4.x. but the driver can work
1172 when using gcc3.4.3.
1176 *Prevent the GCC from striping code for optimization, Otherwise the UEC
1177 will tx failed when you are using gcc4.x.
1179 Signed-off-by: Dave Liu <daveliu@freescale.com>
1181 commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35
1182 Author: Stefan Roese <sr@denx.de>
1183 Date: Thu Mar 1 21:11:36 2007 +0100
1185 [PATCH] Update AMCC Katmai 440SPe eval board support
1187 This patch updates the recently added Katmai board support. The biggest
1188 change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2
1191 Please note, that still some problems are left with some memory
1192 configurations. See the driver for more details.
1194 Signed-off-by: Stefan Roese <sr@denx.de>
1196 commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a
1197 Author: Stefan Roese <sr@denx.de>
1198 Date: Thu Mar 1 07:03:25 2007 +0100
1200 [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM
1202 Signed-off-by: Stefan Roese <sr@denx.de>
1204 commit ccbc7036648e465697ca298ba51e0e76dda352a0
1205 Author: Wolfgang Denk <wd@pollux.denx.de>
1206 Date: Wed Feb 28 01:28:53 2007 +0100
1208 SC3: fix typo in default environment
1210 commit e344568b1b46af85ec32d815586f91bc115d6223
1211 Author: Sergei Poselenov <sposelenov@emcraft.com>
1212 Date: Tue Feb 27 20:15:30 2007 +0300
1214 MCC200: Fixes for update procedure
1216 - fix logic error in image type handling
1217 - make sure file system images (cramfs etc.) get stored in flash
1218 with image header stripped so they can be mounted through MTD
1220 commit 743571145b37182757d4e688a77860b36ee77573
1221 Author: Wolfgang Denk <wd@pollux.denx.de>
1222 Date: Tue Feb 27 14:26:04 2007 +0100
1226 commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72
1227 Author: Sergei Poselenov <sposelenov@emcraft.com>
1228 Date: Tue Feb 27 12:40:16 2007 +0300
1230 MCC200 update - add LCD Progress Indicator
1232 commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44
1233 Author: Stefan Roese <sr@denx.de>
1234 Date: Thu Feb 22 07:43:34 2007 +0100
1236 [PATCH] get_dev() now unconditionally uses manual relocation
1238 Since the relocation fix is not included yet and we're not sure how
1239 it will be added, this patch removes code that required relocation
1240 to be fixed for now.
1242 Signed-off-by: Stefan Roese <sr@denx.de>
1244 commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b
1245 Author: Stefan Roese <sr@denx.de>
1246 Date: Thu Feb 22 07:40:23 2007 +0100
1248 [PATCH] Change systemace driver to select 8 & 16bit mode
1250 As suggested by Grant Likely this patch enables the Xilinx SystemACE
1251 driver to select 8 or 16bit mode upon startup.
1253 Signed-off-by: Stefan Roese <sr@denx.de>
1255 commit 3a197b2fe49d6fa03978e60af2394efe9c70b527
1256 Author: Haiying Wang <Haiying.Wang@freescale.com>
1257 Date: Wed Feb 21 16:52:31 2007 +0100
1259 [PATCH v3] Add sync to ensure flash_write_cmd is fully finished
1261 Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command
1262 is fully finished. The sync() is defined in each CPU's io.h file. For
1263 those CPUs which do not need sync for now, a dummy sync() is defined in
1266 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
1268 commit da04995c7dc6772013a9a0dc5c767f190c402478
1269 Author: Stefan Roese <sr@denx.de>
1270 Date: Wed Feb 21 13:44:34 2007 +0100
1272 [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write)
1274 Signed-off-by: Stefan Roese <sr@denx.de>
1276 commit 751bb57107d78978ae08e697c3deba816f5be091
1277 Author: Stefan Roese <sr@denx.de>
1278 Date: Tue Feb 20 13:21:57 2007 +0100
1280 [PATCH] Fix relocation problem with "new" get_dev() function
1282 This patch enables the "new" get_dev() function for block devices
1283 introduced by Grant Likely to be used on systems that still suffer
1284 from the relocation problems (manual relocation neede because of
1285 problems with linker script).
1287 Hopefully we can resolve this relocation issue soon for all platform
1288 so we don't need this additional code anymore.
1290 Signed-off-by: Stefan Roese <sr@denx.de>
1292 commit d93e2212f962668b3dce091ff5edc33f2347fe37
1293 Author: Stefan Roese <sr@denx.de>
1294 Date: Tue Feb 20 13:17:42 2007 +0100
1296 [PATCH] Update SystemACE driver for 16bit access
1298 This patch removes some problems when the Xilinx SystemACE driver
1299 is used with 16bit access on an big endian platform (like the
1302 Signed-off-by: Stefan Roese <sr@denx.de>
1304 commit 874bb7b88fe9b4648e1288a387af2e31014a72f3
1305 Author: Stefan Roese <sr@denx.de>
1306 Date: Tue Feb 20 13:15:40 2007 +0100
1308 [PATCH] Clean up Katmai (440SPe) linker script
1310 Signed-off-by: Stefan Roese <sr@denx.de>
1312 commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f
1313 Author: Stefan Roese <sr@denx.de>
1314 Date: Tue Feb 20 10:57:08 2007 +0100
1316 [PATCH] Add support for the AMCC Katmai (440SPe) eval board
1318 Signed-off-by: Stefan Roese <sr@denx.de>
1320 commit 0dc018ece13effc689e47479ea9ebf1c98a507f5
1321 Author: Stefan Roese <sr@denx.de>
1322 Date: Tue Feb 20 10:51:26 2007 +0100
1324 [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT
1326 This patch switches to the desired I2C bus when the date/dtt
1327 commands are called. This can be configured using the
1328 CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines.
1330 Signed-off-by: Stefan Roese <sr@denx.de>
1332 commit 4037ed3b63923cfcec27f784a89057c3cbabcedb
1333 Author: Stefan Roese <sr@denx.de>
1334 Date: Tue Feb 20 10:43:34 2007 +0100
1336 [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support
1338 This patch adds support for the DDR2 controller used on the
1339 440SP and 440SPe. It is tested on the Katmai (440SPe) eval
1340 board and works fine with the following DIMM modules:
1342 - Corsair CM2X512-5400C4 (512MByte per DIMM)
1343 - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM)
1344 - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM)
1346 This patch also adds the nice functionality to dynamically
1347 create the TLB entries for the SDRAM (tlb.c). So we should
1348 never run into such problems with wrong (too short) TLB
1349 initialization again on these platforms.
1351 Signed-off-by: Stefan Roese <sr@denx.de>
1353 commit 36d830c9830379045f5daa9f542ac1c990c70068
1354 Author: Stefan Roese <sr@denx.de>
1355 Date: Tue Feb 20 10:35:42 2007 +0100
1357 [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files
1359 Since the existing 4xx SPD SDRAM initialization routines for the
1360 405 SDRAM controller and the 440 DDR controller don't have much in
1361 common this patch splits both drivers into different files.
1363 This is in preparation for the 440 DDR2 controller support (440SP/e).
1365 Signed-off-by: Stefan Roese <sr@denx.de>
1367 commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6
1368 Author: Stefan Roese <sr@denx.de>
1369 Date: Tue Feb 20 10:27:08 2007 +0100
1371 [PATCH] PPC4xx: Add support for multiple I2C busses
1373 This patch adds support for multiple I2C busses on the PPC4xx
1374 platforms. Define CONFIG_I2C_MULTI_BUS in the board config file
1375 to make use of this feature.
1377 It also merges the 405 and 440 i2c header files into one common
1380 Also the 4xx i2c reset procedure is reworked since I experienced
1381 some problems with the first access on the 440SPe Katmai board.
1383 Signed-off-by: Stefan Roese <sr@denx.de>
1385 commit eb867a76238fb38e952c37871b16d0d7fd61c95f
1386 Author: Grant Likely <grant.likely@secretlab.ca>
1387 Date: Tue Feb 20 09:05:45 2007 +0100
1389 [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers
1391 Block device read/write is anonymous data; there is no need to use a
1392 typed pointer. void * is fine. Also add a hook for block_read functions
1394 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
1396 commit 53758fa20e935cc87eeb0519ed365df753a6f289
1397 Author: Grant Likely <grant.likely@secretlab.ca>
1398 Date: Tue Feb 20 09:05:38 2007 +0100
1400 [PATCH 8_9] Add block_write hook to block_dev_desc_t
1402 Preparation for future patches which support block device writing
1404 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
1406 commit f4852ebe6ca946a509667eb68be42026f837be76
1407 Author: Grant Likely <grant.likely@secretlab.ca>
1408 Date: Tue Feb 20 09:05:31 2007 +0100
1410 [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros
1412 Register read/write does not need to be wrapped in a full function. The
1413 patch replaces them with macros.
1415 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
1417 commit 3a8ce9af6fcb5744a7851b4440c07688acc40844
1418 Author: Grant Likely <grant.likely@secretlab.ca>
1419 Date: Tue Feb 20 09:05:23 2007 +0100
1421 [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c
1423 The code in this file is not a command; it is a device driver. Put it in
1424 the correct place. There are zero functional changes in this patch, it
1425 only moves the file.
1427 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
1429 commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4
1430 Author: Grant Likely <grant.likely@secretlab.ca>
1431 Date: Tue Feb 20 09:05:16 2007 +0100
1433 [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent)
1435 This patch is in preparation of additional changes to the sysace driver.
1436 May as well take this opportunity to fixup the inconsistent whitespace since
1437 this file is about to undergo major changes anyway.
1439 There are zero functional changes in this patch. It only cleans up the
1442 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
1444 commit 80ba981d940471fe7e539e64fa3d2bd80002beda
1445 Author: Grant Likely <grant.likely@secretlab.ca>
1446 Date: Tue Feb 20 09:05:07 2007 +0100
1448 [PATCH 4_4] Remove local implementation of isprint() in ft_build.c
1450 isprint is already defined in ctype.c
1452 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
1454 commit c95c4280d751ca078c2ff58228d2f2b44ccf0600
1455 Author: Grant Likely <grant.likely@secretlab.ca>
1456 Date: Tue Feb 20 09:05:00 2007 +0100
1458 [PATCH 3_9] Move buffer print code from md command to common function
1460 Printing a buffer is a darn useful thing. Move the buffer print code
1461 into print_buffer() in lib_generic/
1463 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
1465 commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a
1466 Author: Grant Likely <grant.likely@secretlab.ca>
1467 Date: Tue Feb 20 09:04:52 2007 +0100
1469 [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets
1471 Change the xilinx device drivers and board code to include config.h
1472 instead of xparameters.h directly. config.h always includes the
1473 correct xparameters file. This change reduces the posibility of
1474 including the wrong file when adding a new xilinx board port
1476 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
1478 commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7
1479 Author: Grant Likely <grant.likely@secretlab.ca>
1480 Date: Tue Feb 20 09:04:34 2007 +0100
1482 [PATCH 1_4] Merge common get_dev() routines for block devices
1484 Each of the filesystem drivers duplicate the get_dev routine. This change
1485 merges them into a single function in part.c
1487 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
1489 commit f5fcc3c20b65554e98a165542c36ee0c610a2d81
1490 Author: Wolfgang Denk <wd@pollux.denx.de>
1491 Date: Mon Feb 19 23:09:51 2007 +0100
1493 MCC200: Software Updater: allow both "ramdisk" and "filesystem" types
1494 as root file system images.
1496 commit 489c696ae7211218961d159e43e722d74c36fcbc
1497 Author: Sergei Poselenov <sposelenov@emcraft.com>
1498 Date: Wed Feb 14 14:30:28 2007 +0300
1500 MCC200: Extensions to Software Update Mechanism
1502 Update / extend Software Update Mechanism for MCC200 board:
1504 - Add support for rootfs image added. The environment variables
1505 "rootfs_st" and "rootfs_nd" can be used to override the default
1506 values of the image start and end.
1507 - Remove excessive key check code.
1510 commit 4be23a12f23f1372634edc3215137b09768b7949
1511 Author: Stefan Roese <sr@denx.de>
1512 Date: Mon Feb 19 08:23:15 2007 +0100
1514 [PATCH] Update Sequoia EBC configuration (NOR FLASH)
1516 As spotted by Matthias Fuchs, the READY input should not be
1517 enabled for the NOR FLASH on the Sequoia board.
1519 Signed-off-by: Stefan Roese <sr@denx.de>
1521 commit 2605e90bf676d48123afe5719a846d2b52b24aac
1522 Author: Heiko Schocher <hs@pollux.denx.de>
1523 Date: Fri Feb 16 07:57:42 2007 +0100
1525 [PATCH] Added support for the jupiter board.
1527 Signed-off-by: Heiko Schocher <hs@denx.de>
1529 commit 497d012e5be0194e1084073d0081eb1a844796b2
1530 Author: Gary Jennejohn <garyj@pollux.denx.de>
1531 Date: Mon Feb 12 13:11:50 2007 +0100
1533 LPC2292: patch from Siemens.
1535 commit b0b1a920aebead0d44146e73676ae9d80fffc8e2
1536 Author: Stefan Roese <sr@denx.de>
1537 Date: Sat Feb 10 08:49:31 2007 +0100
1539 [PATCH] Add missing p3mx.h file to repository (ups)
1541 Signed-off-by: Stefan Roese <sr@denx.de>
1543 commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a
1544 Author: Bartlomiej Sieka <tur@semihalf.com>
1545 Date: Fri Feb 9 10:45:42 2007 +0100
1547 [Motion-PRO] Preliminary support for the Motion-PRO board.
1549 commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994
1550 Author: Stefan Roese <sr@denx.de>
1551 Date: Wed Feb 7 16:51:08 2007 +0100
1553 [PATCH] Update some AMCC 4xx board config files (set initrd_high)
1555 Some boards that can have more than 768MBytes of SDRAM need to
1556 set "initrd_high", so that the initrd can be accessed by the
1559 Signed-off-by: Stefan Roese <sr@denx.de>
1561 commit 7372ca68227930d03cffa548310524cad5b96733
1562 Author: Stefan Roese <sr@denx.de>
1563 Date: Fri Feb 2 12:44:22 2007 +0100
1565 [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards
1567 Previously the strapping DCR/SDR was read to determine if the internal PCI
1568 arbiter is enabled or not. This strapping bit can be overridden, so now
1569 the current status is read from the correct DCR/SDR register.
1571 Signed-off-by: Stefan Roese <sr@denx.de>
1573 commit 2aa54f651a42d198673318f07a20c89a43e4d197
1574 Author: Stefan Roese <sr@denx.de>
1575 Date: Fri Feb 2 12:42:08 2007 +0100
1577 [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier
1579 Signed-off-by: Stefan Roese <sr@denx.de>
1581 commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b
1582 Author: Stefan Roese <sr@denx.de>
1583 Date: Thu Feb 1 13:22:41 2007 +0100
1585 [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file
1587 When PCI PNP is enabled the pci pnp configuration routine is called
1588 which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some
1589 problems with some PCI cards. For now disable the PCI PNP configuration.
1591 Signed-off-by: Stefan Roese <sr@denx.de>
1593 commit 2902fadade3be7659467e8d074048c6b7068f5c0
1594 Author: Stefan Roese <sr@denx.de>
1595 Date: Wed Jan 31 16:56:10 2007 +0100
1597 [PATCH] Update 440EPx/440GRx cpu detection
1599 Signed-off-by: Stefan Roese <sr@denx.de>
1601 commit d5ea287b02a6945c3977410e364a879dd1a555c8
1602 Author: Stefan Roese <sr@denx.de>
1603 Date: Wed Jan 31 16:38:04 2007 +0100
1605 [PATCH] Update esd cpci5200 files
1607 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
1609 commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab
1610 Author: Stefan Roese <sr@denx.de>
1611 Date: Wed Jan 31 16:37:34 2007 +0100
1613 [PATCH] Add support for esd mecp5200 board
1615 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
1617 commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff
1618 Author: Stefan Roese <sr@denx.de>
1619 Date: Wed Jan 31 12:38:50 2007 +0100
1621 [PATCH] Remove unneccessary yellowstone board config file
1623 Signed-off-by: Stefan Roese <sr@denx.de>
1625 commit e802594b6fa1b166308820c276b96dc0d7cc731c
1626 Author: Stefan Roese <sr@denx.de>
1627 Date: Tue Jan 30 17:06:10 2007 +0100
1629 [PATCH] Update Sequoia (440EPx) config file
1631 The config file now handles the 2nd target, the Rainier (440GRx)
1632 evaluation board better. Additionally the PPC input clock was
1633 adjusted to match the correct value of 33.0 MHz.
1635 Signed-off-by: Stefan Roese <sr@denx.de>
1637 commit 700200c67e73b83751418abe7815840dca8fd6cb
1638 Author: Stefan Roese <sr@denx.de>
1639 Date: Tue Jan 30 17:04:19 2007 +0100
1641 [PATCH] Merge Yosemite & Yellowstone board ports
1643 Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR)
1644 share one config file and all board specific files. This way we
1645 don't have to maintain two different sets of files for nearly
1648 Signed-off-by: Stefan Roese <sr@denx.de>
1650 commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6
1651 Author: Stefan Roese <sr@denx.de>
1652 Date: Tue Jan 30 15:01:49 2007 +0100
1654 [PATCH] Update Prodrive SCPU (PDNB3 variant) board
1656 SCPU doesn't use redundant environment in flash.
1658 Signed-off-by: Stefan Roese <sr@denx.de>
1660 commit 6304430ed642ea8fa15c9e5af965ac2e033eec45
1661 Author: Stefan Roese <sr@denx.de>
1662 Date: Tue Jan 30 12:51:07 2007 +0100
1664 [PATCH] alpr: Update alpr board config file
1666 Signed-off-by: Stefan Roese <sr@denx.de>
1668 commit f8db84f132b1e335f20f96138a1f09ed97b08664
1669 Author: Wolfgang Denk <wd@pollux.denx.de>
1670 Date: Tue Jan 30 00:50:40 2007 +0100
1672 LPC2292 SODIMM port coding style cleanup.
1674 commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3
1675 Author: Gary Jennejohn <garyj@pollux.denx.de>
1676 Date: Wed Jan 24 12:16:56 2007 +0100
1678 Add port for the lpc2292sodimm evaluation board from EmbeddedArtists
1680 commit 2daf046ba627f85f44195815778140039636244e
1681 Author: Bartlomiej Sieka <tur@semihalf.com>
1682 Date: Tue Jan 23 17:22:06 2007 +0100
1684 [iDMR] Add MTD and JFFS2 support, also add default partition definition.
1686 commit f7db33101fbc9c8f0a10738ce87034875a17aeb9
1687 Author: Bartlomiej Sieka <tur@semihalf.com>
1688 Date: Tue Jan 23 14:21:14 2007 +0100
1690 [iDMR] Flash driver on initialisation write-protects some sectors,
1691 currently sectors 0-3. Sector 3 does not need to be protected, though
1692 (U-boot occupies sectors 0-1 and the environment sector 2). This commit
1693 fixes this, i.e., only sectors 0-2 are protected.
1695 commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de
1696 Author: Bartlomiej Sieka <tur@semihalf.com>
1697 Date: Tue Jan 23 14:11:22 2007 +0100
1699 [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g.,
1700 "mii device" results in "Unexpected exception"). Fixing this properly
1701 requires some clean-up in the FEC drivers infrastructure for ColdFire, so
1702 this commit disables MII commads for now.
1704 commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c
1705 Author: Bartlomiej Sieka <tur@semihalf.com>
1706 Date: Tue Jan 23 13:25:22 2007 +0100
1708 [ColdFire MCF5271 family] Add CPU detection based on the value of Chip
1709 Identification Register (CIR).
1711 commit a4012396645533aef218354eeba754dff0deace8
1712 Author: Wolfgang Denk <wd@pollux.denx.de>
1713 Date: Fri Jan 19 23:08:39 2007 +0100
1717 commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39
1718 Author: Heiko Schocher <hs@pollux.denx.de>
1719 Date: Fri Jan 19 19:57:10 2007 +0100
1721 [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT.
1723 Signed-off-by: Heiko Schocher <hs@denx.de>
1725 commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167
1726 Author: Heiko Schocher <hs@pollux.denx.de>
1727 Date: Fri Jan 19 18:05:26 2007 +0100
1729 [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver
1730 if you must swap the bytes between reading/writing.
1731 (Needed for the SC3 board)
1733 Signed-off-by: Heiko Schocher <hs@denx.de>
1735 commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276
1736 Author: Stefan Roese <sr@denx.de>
1737 Date: Thu Jan 18 16:05:47 2007 +0100
1739 [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board
1741 Signed-off-by: Stefan Roese <sr@denx.de>
1743 commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e
1744 Author: Stefan Roese <sr@denx.de>
1745 Date: Thu Jan 18 11:54:52 2007 +0100
1747 [PATCH] Update Prodrive P3Mx support
1749 Signed-off-by: Stefan Roese <sr@denx.de>
1751 commit 34167a36c29ee946b727465db5c014746a08e978
1752 Author: Stefan Roese <sr@denx.de>
1753 Date: Thu Jan 18 11:48:10 2007 +0100
1755 [PATCH] Add missing Taishan config file
1757 Signed-off-by: Stefan Roese <sr@denx.de>
1759 commit cb4820725e9fc409c5cbc8e83054a6ed522d2111
1760 Author: Heiko Schocher <hs@pollux.denx.de>
1761 Date: Thu Jan 18 11:28:51 2007 +0100
1763 [PATCH] Fix: Compilerwarnings for SC3 board.
1764 The EBC Configuration Register is now by CFG_EBC_CFG definable
1765 Added JFFS2 support for the SC3 board.
1767 Signed-off-by: Heiko Schocher <hs@denx.de>
1769 commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd
1770 Author: Stefan Roese <sr@denx.de>
1771 Date: Thu Jan 18 10:25:34 2007 +0100
1773 [PATCH] Add support for AMCC Taishan PPC440GX eval board
1775 Signed-off-by: Stefan Roese <sr@denx.de>
1777 commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad
1778 Author: Wolfgang Denk <wd@pollux.denx.de>
1779 Date: Tue Jan 16 18:30:50 2007 +0100
1781 Raname solidcard3 into sc3; add redundant env for sc3
1783 commit 1bbbbdd20fcec9933697000dcf55ff7972622596
1784 Author: Wolfgang Denk <wd@pollux.denx.de>
1785 Date: Tue Jan 16 12:46:35 2007 +0100
1787 Update default environment for Solidcard3
1789 commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd
1790 Author: Stefan Roese <sr@denx.de>
1791 Date: Mon Jan 15 09:46:29 2007 +0100
1793 [PATCH] Fix 440SPe rev B detection from previous patch
1795 Signed-off-by: Stefan Roese <sr@denx.de>
1797 commit a443d31410c571ee8f970da819a44d698fdd6b1f
1798 Author: Heiko Schocher <hs@pollux.denx.de>
1799 Date: Sun Jan 14 13:35:31 2007 +0100
1801 [FIX] correct I2C Writes for the LM81 Sensor.
1803 Signed-off-by: Heiko Schocher <hs@denx.de>
1805 commit 0bba5452835f19a61204edcda3a58112fd8e2208
1806 Author: Wolfgang Denk <wd@pollux.denx.de>
1807 Date: Sat Jan 13 11:17:10 2007 +0100
1809 Undo commit 3033ebb2: reset command does not take any arguments
1811 Haiying Wang's modification to the reset command was broken, undo it.
1813 Signed-off-by: Wolfgang Denk <wd@denx.de>
1815 commit 95981778cff0038fd9941044d6a3eda810e33258
1816 Author: Stefan Roese <sr@denx.de>
1817 Date: Sat Jan 13 08:01:03 2007 +0100
1819 [PATCH] Update 440SP(e) cpu revisions
1821 Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.
1823 Signed-off-by: Stefan Roese <sr@denx.de>
1825 commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7
1826 Author: Stefan Roese <sr@denx.de>
1827 Date: Sat Jan 13 07:59:56 2007 +0100
1829 [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
1831 Now the board revision and the current PCI bus speed are printed after
1834 Also the EBC initialising is now done via defines in the board config
1837 Signed-off-by: Stefan Roese <sr@denx.de>
1839 commit 36adff362c2c0141ff8a810d42a7e478f779130f
1840 Author: Stefan Roese <sr@denx.de>
1841 Date: Sat Jan 13 07:59:19 2007 +0100
1843 [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
1845 Now the board revision and the current PCI bus speed are printed after
1848 Also the EBC initialising is now done via defines in the board config
1851 Signed-off-by: Stefan Roese <sr@denx.de>
1853 commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6
1854 Author: Stefan Roese <sr@denx.de>
1855 Date: Sat Jan 13 07:57:51 2007 +0100
1857 [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed
1859 Now the board revision and the current PCI bus speed are printed after
1862 Signed-off-by: Stefan Roese <sr@denx.de>
1864 commit ca43ba18e910206ef8063e4b22d282630bff3fd2
1865 Author: Heiko Schocher <hs@pollux.denx.de>
1866 Date: Thu Jan 11 15:44:44 2007 +0100
1868 Added support for the SOLIDCARD III board from Eurodesign
1870 Signed-off-by: Heiko Schocher <hs@denx.de>
1872 commit 6abaee42621c07e81a2cd189ad4368b5e8c50280
1873 Author: Reinhard Thies <Reinhard.Thies@web.de>
1874 Date: Wed Jan 10 14:41:14 2007 +0100
1876 Adjusted default environment for cam5200 board.
1878 commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9
1879 Author: Wolfgang Denk <wd@pollux.denx.de>
1880 Date: Wed Jan 10 15:35:52 2007 +0100
1884 commit 787fa15860a57833e50bd30555079a9cd4e519b8
1885 Author: Wolfgang Denk <wd@pollux.denx.de>
1886 Date: Wed Jan 10 01:28:39 2007 +0100
1888 Fix auto_update for MCC200 board.
1890 The invocation of do_auto_update() is moved to the end of the
1891 misc_init_r() function, after the flash mappings have been
1892 initialized. Please find attached a patch that implements that
1895 Also correct the decoding of the keypad status. With this update, the
1896 key that will trigger the update is Column 2, Row 2.
1898 commit d9384de2f571046e71081bae22b49e3d5ca2e3d5
1899 Author: Marian Balakowicz <m8@semihalf.com>
1900 Date: Wed Jan 10 00:26:15 2007 +0100
1902 CAM5200 flash driver modifications:
1903 - use CFI driver (replaces custom flash driver) for main 'cam5200' target
1904 - add second build target 'cam5200_niosflash' which still uses custom driver
1906 commit 67fea022fa957f59653b5238c7496f80a6b70432
1907 Author: Markus Klotzbuecher <mk@denx.de>
1908 Date: Tue Jan 9 16:02:48 2007 +0100
1910 SPC1920: cleanup memory contoller setup
1912 commit 8fc2102faa23593c80381437c09f7745a14deb40
1913 Author: Markus Klotzbuecher <mk@denx.de>
1914 Date: Tue Jan 9 14:57:14 2007 +0100
1916 Fix the cpu speed setup to work with all boards.
1918 commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c
1919 Author: Markus Klotzbuecher <mk@denx.de>
1920 Date: Tue Jan 9 14:57:13 2007 +0100
1922 SPC1920: add support for the FM18L08 Ramtron FRAM
1924 commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223
1925 Author: Markus Klotzbuecher <mk@denx.de>
1926 Date: Tue Jan 9 14:57:13 2007 +0100
1928 SPC1920: update the HPI register addresses to work with the second
1929 generation of hardware
1931 commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e
1932 Author: Markus Klotzbuecher <mk@creamnet.de>
1933 Date: Tue Jan 9 14:57:13 2007 +0100
1935 Miscellanious spc1920 related cleanups
1937 commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120
1938 Author: Markus Klotzbuecher <mk@denx.de>
1939 Date: Tue Jan 9 14:57:12 2007 +0100
1941 SPC1920 GO/NOGO led should be set to color red in U-Boot
1943 commit 0be62728aac459ba268d6d752ed49ec0e2bc7348
1944 Author: Markus Klotzbuecher <mk@creamnet.de>
1945 Date: Tue Jan 9 14:57:12 2007 +0100
1947 Add support for the DS3231 RTC
1949 commit 8139567b60d678584b05f0718a681f2047c5e14f
1950 Author: Markus Klotzbuecher <mk@creamnet.de>
1951 Date: Tue Jan 9 14:57:11 2007 +0100
1953 SMC1 uses external CLK4 instead of BRG on spc1920
1955 commit d8d9de1a02fbd880b613d607143d1f57342affc7
1956 Author: Markus Klotzbuecher <mk@creamnet.de>
1957 Date: Tue Jan 9 14:57:10 2007 +0100
1959 Update the SPC1920 CMB PLD driver
1961 commit 3f34f869162750e5e999fd140f884f5de952bcfe
1962 Author: Markus Klotzbuecher <mk@creamnet.de>
1963 Date: Tue Jan 9 14:57:10 2007 +0100
1965 Add / enable I2C support on the spc1920 board
1967 commit d28707dbce1e9ac2017ad051da4133bf22b4204f
1968 Author: Markus Klotzbuecher <mk@creamnet.de>
1969 Date: Tue Jan 9 14:57:10 2007 +0100
1971 Add support for the tms320671x host port interface (HPI)
1973 commit f4eb54529bb3664c3a562e488b460fe075f79d67
1974 Author: Wolfgang Denk <wd@pollux.denx.de>
1975 Date: Sun Jan 7 00:13:11 2007 +0100
1977 Prepare for release 1.2.0
1979 commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02
1980 Author: Stefan Roese <sr@denx.de>
1981 Date: Sat Jan 6 15:58:09 2007 +0100
1983 [PATCH] 44x: Fix problem with DDR controller setup (refresh rate)
1985 This patch fixes a problem with an incorrect setup for the refresh
1986 timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c
1988 Signed-off-by: Stefan Roese <sr@denx.de>
1990 commit f16c1da9577f06c5fc08651a4065537407de4635
1991 Author: Stefan Roese <sr@denx.de>
1992 Date: Sat Jan 6 15:56:13 2007 +0100
1994 [PATCH] Update ALPR board files
1996 This update brings the ALPR board support to the newest version.
1997 It also fixes a problem with the NAND driver.
1999 Signed-off-by: Stefan Roese <sr@denx.de>
2001 commit cd1d937f90250a32988c37b2b4af8364d25de8ed
2002 Author: Stefan Roese <sr@denx.de>
2003 Date: Fri Jan 5 11:46:05 2007 +0100
2005 [PATCH] nand: Fix problem with oobsize calculation
2007 Here the description from Brian Brelsford <Brian_Brelsford@dell.com>:
2009 The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part
2010 returns a 0x15. In the code fragment below bits [1:0] determine the
2011 page size, it is ANDed via "(extid & 0x3)" then shifted out. The
2012 next field is also ANDed with 0x3. However this is a one bit field
2013 as defined in the Hynix and Samsung parts in the 4th ID byte that
2014 determins the oobsize, not a two bit field. It works on Samsung as
2015 bits[3:2] are 01. However for the Hynix there is a 11 in these two
2016 bits, so the oob size gets messed up.
2018 I checked the correct linux code and the suggested fix from Brian is
2019 also available in the linux nand mtd driver.
2021 Signed-off-by: Stefan Roese <sr@denx.de>
2023 commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e
2024 Author: Stefan Roese <sr@denx.de>
2025 Date: Fri Jan 5 10:40:36 2007 +0100
2027 [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
2029 This fix will make the MAL burst disabling patch for the Linux
2030 EMAC driver obsolete.
2032 Signed-off-by: Stefan Roese <sr@denx.de>
2034 commit 023889838282b6237b401664f22dd22dfba2c066
2035 Author: Stefan Roese <sr@denx.de>
2036 Date: Fri Jan 5 10:38:05 2007 +0100
2038 [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
2040 This code will optimize the DDR2 controller setup on a board specific
2043 Note: This code doesn't work right now on the NAND booting image for the
2044 Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
2046 Signed-off-by: Stefan Roese <sr@denx.de>
2048 commit cce4acbb68398634b8d011ed7bb0d12269c84230
2049 Author: Bartlomiej Sieka <tur@semihalf.com>
2050 Date: Thu Dec 28 19:08:21 2006 +0100
2053 - fix a typo in V38B config file
2054 - move watchdog initialisation earlier in the boot process
2055 - add "wdt=off" to default kernel command line (disables kernel watchdog)
2057 commit 92eb729bad876725aeea908d2addba0800620840
2058 Author: Wolfgang Denk <wd@pollux.denx.de>
2059 Date: Wed Dec 27 01:26:13 2006 +0100
2061 Fix bug in adaption of Stefano Babic's CFI driver patch.
2063 commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3
2064 Author: Wolfgang Denk <wd@pollux.denx.de>
2065 Date: Sun Dec 24 01:42:57 2006 +0100
2069 commit d784fdb05900ada3686d5778783e1fb328e9fb66
2070 Author: Stefano Babic <sbabic@denx.de>
2071 Date: Tue Dec 12 00:22:42 2006 +0100
2073 Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)
2075 commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2
2076 Author: Stefan Roese <sr@denx.de>
2077 Date: Fri Dec 22 14:29:40 2006 +0100
2079 [PATCH] Fix sequoia flash autodetection (finally correct)
2081 Now 32MByte and 64MByte FLASH is know to work and other
2082 configurations should work too.
2084 Signed-off-by: Stefan Roese <sr@denx.de>
2086 commit 82e5236a8b719543643fd26d5827938ab2b94818
2087 Author: Wolfgang Denk <wd@pollux.denx.de>
2088 Date: Fri Dec 22 10:30:26 2006 +0100
2090 Minor code cleanup; update CHANGELOG.
2092 commit fa23044564091f05d9695beb7b5b9a931e7f41a4
2093 Author: Heiko Schocher <hs@pollux.denx.de>
2094 Date: Thu Dec 21 17:17:02 2006 +0100
2096 Added support for the TQM8272 board from TQ
2098 Signed-off-by: Heiko Schocher <hs@denx.de>
2100 commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c
2101 Author: Heiko Schocher <hs@pollux.denx.de>
2102 Date: Thu Dec 21 16:14:48 2006 +0100
2104 [PATCH] Add support for the UC101 board from MAN.
2106 Signed-off-by: Heiko Schocher <hs@denx.de>
2108 commit c84bad0ef60e7055ab0bd49b93069509cecc382a
2109 Author: Bartlomiej Sieka <tur@semihalf.com>
2110 Date: Wed Dec 20 00:29:43 2006 +0100
2112 Fix to make the baudrate changes immediate for the MCF52x2 family.
2114 commit daa6e418bcc0c717752e8de939c213c790286096
2115 Author: Bartlomiej Sieka <tur@semihalf.com>
2116 Date: Wed Dec 20 00:27:32 2006 +0100
2118 Preliminary support for the iDMR board (ColdFire).
2120 commit cdb97a6678826f85e7c69eae6a1c113d034c9b10
2121 Author: Andrei Safronov <safronov@pollux.denx.de>
2122 Date: Fri Dec 8 16:23:08 2006 +0100
2124 automatic update mechanism
2126 commit dd520bf314c7add4183c5191692180f576f96b60
2127 Author: Wolfgang Denk <wd@pollux.denx.de>
2128 Date: Thu Nov 30 18:02:20 2006 +0100
2132 commit 8d9a8610b8256331132227e9e6585c6bd5742787
2133 Author: Wolfgang Denk <wd@pollux.denx.de>
2134 Date: Thu Nov 30 01:54:07 2006 +0100
2136 Code cleanup. Update CHANGELOG.
2138 commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba
2139 Author: Grant Likely <grant.likely@secretlab.ca>
2140 Date: Wed Nov 29 16:23:42 2006 +0100
2142 [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
2144 The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
2145 not the XLB frequency.
2147 This patch depends on the previous patches for MPC52xx device tree support
2149 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2150 Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2152 commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6
2153 Author: Stefan Roese <sr@denx.de>
2154 Date: Wed Nov 29 15:42:37 2006 +0100
2156 [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
2158 This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
2159 and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
2160 quite similar and share the same board directory "prodrive/p3mx"
2161 and the same config file "p3mx.h".
2163 Signed-off-by: Stefan Roese <sr@denx.de>
2165 commit 1bdd46832aeb569f5e04b1f20f64318525b6525a
2166 Author: Stefan Roese <sr@denx.de>
2167 Date: Wed Nov 29 12:53:15 2006 +0100
2169 [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command
2171 In the bootvx command the load address was only read from the env
2172 variable "loadaddr" and not optionally passed as paramter as described
2173 in the help. This is fixed with this patch. The behaviour is now the
2174 same as in the bootelf command.
2176 Signed-off-by: Stefan Roese <sr@denx.de>
2178 commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592
2179 Author: Stefan Roese <sr@denx.de>
2180 Date: Wed Nov 29 12:03:57 2006 +0100
2182 [PATCH] include/ppc440.h minor error affecting interrupts
2184 Fixed include/ppc440.c for UIC address Bug
2186 Corrects bug affecting the addresses for the universal interrupt
2187 controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.
2189 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
2190 Signed-off-by: Stefan Roese <sr@denx.de>
2192 commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a
2193 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
2194 Date: Tue Nov 28 16:17:27 2006 -0600
2196 Make fsl-i2c not conflict with SOFT I2C
2198 Signed-off-by: Timur Tabi <timur@freescale.com>
2200 commit 14198bf768fdc958e3c1afd2404e5262208e98d7
2201 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
2202 Date: Tue Nov 28 16:17:18 2006 -0600
2204 Fix I2C master address initialization.
2206 Signed-off-by: Timur Tabi <timur@freescale.com>
2208 commit cf3d045e51ca8dcc6cf759827140861d6ac25c04
2209 Author: Kim Phillips <kim.phillips@freescale.com>
2210 Date: Tue Nov 28 23:31:19 2006 -0600
2212 Assign maintainers for mpc8349emds and mpc8360emds
2214 Dave for mpc8360emds, and me for mpc8349emds.
2216 commit 1aa934c81b77f2080d3ca4b226eab67b17a33961
2217 Author: Kim Phillips <kim.phillips@freescale.com>
2218 Date: Tue Nov 28 23:28:33 2006 -0600
2220 Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c
2222 give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src
2223 since they are passed by reference to ucc_get_cmxucr_reg and assigned.
2225 commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5
2226 Author: Timur Tabi <timur@freescale.com>
2227 Date: Tue Nov 28 12:09:35 2006 -0600
2229 mpc83xx: Miscellaneous code style fixes
2231 Implement various code style fixes and similar changes.
2233 Signed-off-by: Timur Tabi <timur@freescale.com>
2235 commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706
2236 Author: Stefan Roese <sr@denx.de>
2237 Date: Tue Nov 28 17:55:49 2006 +0100
2239 [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
2241 This patch adds the code and configuration necessary to boot with an
2242 arch/powerpc Linux kernel.
2244 Signed-off-by: Grant Likely <grant.likely@gmail.com>
2245 Acked-by: Jon Loeliger <jdl@freescale.com>
2247 commit e732faec95a83cb468b4850ae807c8301dde8f6a
2248 Author: Stefan Roese <sr@denx.de>
2249 Date: Tue Nov 28 16:09:24 2006 +0100
2251 [PATCH] PPC4xx: 440SP Rev. C detection added
2253 Signed-off-by: Stefan Roese <sr@denx.de>
2255 commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0
2256 Author: Stefan Roese <sr@denx.de>
2257 Date: Tue Nov 28 11:04:45 2006 +0100
2259 [PATCH] nand: Fix patch merge problem
2261 Signed-off-by: Stefan Roese <sr@denx.de>
2263 commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2
2264 Author: Stefan Roese <sr@denx.de>
2265 Date: Tue Nov 28 11:04:45 2006 +0100
2267 [PATCH] nand: Fix patch merge problem
2269 Signed-off-by: Stefan Roese <sr@denx.de>
2271 commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
2272 Author: Wolfgang Denk <wd@pollux.denx.de>
2273 Date: Mon Nov 27 22:53:53 2006 +0100
2277 commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
2278 Author: Stefan Roese <sr@denx.de>
2279 Date: Mon Nov 27 17:43:25 2006 +0100
2281 [PATCH] 4xx_enet.c: Correct the setting of zmiifer register
2283 Patch below corrects the setting of the zmiifer register, it was
2284 overwritting the register rather than ORing the settings.
2286 Signed-off-by: Neil Wilson <NWilson@airspan.com>
2287 Signed-off-by: Stefan Roese <sr@denx.de>
2289 commit d1a72545296800b7e219f93104ad5836f0003d66
2290 Author: Stefan Roese <sr@denx.de>
2291 Date: Mon Nov 27 17:34:10 2006 +0100
2293 [PATCH] Select NAND embedded environment from board configuration
2295 The current NAND Bootloader setup forces the environment
2296 variables to be in line with the bootloader. This change
2297 enables the configuration to be made in the board include
2298 file instead so that it can be individually enabled.
2300 Signed-off-by: Nick Spence <nick.spence@freescale.com>
2301 Signed-off-by: Stefan Roese <sr@denx.de>
2303 commit 15784862857c3c2214498defcfed84ff137fb81e
2304 Author: Stefan Roese <sr@denx.de>
2305 Date: Mon Nov 27 17:22:19 2006 +0100
2307 [PATCH] nand_wait() timeout fixes
2309 Two fixes for the nand_wait() function in
2310 drivers/nand/nand_base.c:
2312 1. Use correct timeouts. The original timeouts in Linux
2313 source are 400ms and 20ms not 40s and 20s
2315 2. Return correct error value in case of timeout. 0 is
2318 Signed-off-by: Rui Sousa <rui.sousa@laposte.net>
2319 Signed-off-by: Stefan Roese <sr@denx.de>
2321 commit da5553b095bf04f4f109ad7e565dae3aba47b230
2322 Author: Stefan Roese <sr@denx.de>
2323 Date: Mon Nov 27 17:04:06 2006 +0100
2325 [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
2327 This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
2328 arguments to bootm. It removes the getenv("disable_of") test that used
2329 to be used for this purpose.
2331 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2332 Acked-by: Jon Loeliger <jdl@freescale.com>
2334 commit a9398e018593782c5fa7d0741955fc1256b34c1e
2335 Author: Wolfgang Denk <wd@pollux.denx.de>
2336 Date: Mon Nov 27 15:32:42 2006 +0100
2338 Minor code cleanup. Update CHANGELOG.
2340 commit 1729b92cde575476684bffe819d0b7791b57bff2
2341 Author: Stefan Roese <sr@denx.de>
2342 Date: Mon Nov 27 14:52:04 2006 +0100
2344 [PATCH] 4xx: Fix problem with board specific reset code (now for real)
2346 Signed-off-by: Stefan Roese <sr@denx.de>
2348 commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7
2349 Author: Stefan Roese <sr@denx.de>
2350 Date: Mon Nov 27 14:49:51 2006 +0100
2352 [PATCH] alpr: remove unused board specific flash driver
2354 Signed-off-by: Stefan Roese <sr@denx.de>
2356 commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1
2357 Author: Stefan Roese <sr@denx.de>
2358 Date: Mon Nov 27 14:48:41 2006 +0100
2360 [PATCH] 4xx: Fix problem with board specific reset code
2362 Signed-off-by: Stefan Roese <sr@denx.de>
2364 commit ec0c2ec725aec9524a177a77ce75559e644a931a
2365 Author: Stefan Roese <sr@denx.de>
2366 Date: Mon Nov 27 14:46:06 2006 +0100
2368 [PATCH] Remove testing 4xx enet PHY setup
2370 Signed-off-by: Stefan Roese <sr@denx.de>
2372 commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148
2373 Author: Stefan Roese <sr@denx.de>
2374 Date: Mon Nov 27 14:12:17 2006 +0100
2376 [PATCH] Update Prodrive ALPR board support (440GX)
2378 Signed-off-by: Stefan Roese <sr@denx.de>
2380 commit 78d620ebb5871d252270dedfad60c6568993b780
2381 Author: Wolfgang Denk <wd@atlas.denx.de>
2382 Date: Thu Nov 23 22:58:58 2006 +0100
2384 Updates for TQM5200 modules:
2385 - fix off-by-one error in board/tqm5200/cam5200_flash.c error message
2386 - simplify "udate" definitions
2388 commit 2053283304eeddf250d109e6791eb6fa4cad14f7
2389 Author: Stefan Roese <sr@denx.de>
2390 Date: Wed Nov 22 13:20:50 2006 +0100
2392 [PATCH] PPC4xx start.S: Fix for processor errata
2394 Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
2395 errata 1.12: 440_33 by moving patch up in code.
2397 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
2398 Signed-off-by: Stefan Roese <sr@denx.de>
2400 commit 4ef6251403f637841000e0fef9e832aa01339822
2401 Author: Stefan Roese <sr@denx.de>
2402 Date: Mon Nov 20 20:39:52 2006 +0100
2404 [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
2406 Signed-off-by: Stefan Roese <sr@denx.de>
2408 commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
2409 Author: Wolfgang Denk <wd@pollux.denx.de>
2410 Date: Mon Nov 20 10:28:30 2006 +0100
2414 commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
2415 Author: Stefan Roese <sr@denx.de>
2416 Date: Mon Nov 13 13:55:24 2006 +0100
2418 [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
2420 * Adds support for AMD command set Top Boot flash geometry reversal
2421 * Adds support for reading JEDEC Manufacturer ID and Device ID
2422 * Adds support for displaying command set, manufacturer id and
2424 * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
2425 * Removes outdated change history (refer to git log instead)
2427 Signed-off-by: Tolunay Orkun <listmember@orkun.us>
2428 Signed-off-by: Stefan Roese <sr@denx.de>
2430 commit b21b511d4c50408f4853f46f06b601272196223f
2431 Author: Wolfgang Denk <wd@pollux.denx.de>
2432 Date: Sun Nov 12 21:13:23 2006 +0100
2436 commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
2437 Author: Bartlomiej Sieka <tur@semihalf.com>
2438 Date: Sat Nov 11 22:48:22 2006 +0100
2440 Disable the watchdog in the default config for the V38B board.
2442 commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
2443 Author: Bartlomiej Sieka <tur@semihalf.com>
2444 Date: Sat Nov 11 22:43:00 2006 +0100
2446 Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
2447 group is enabled for USB earlier (in cpu_init_f() instead of
2448 usb_lowlevel_init()).
2450 commit 91650b3e4de688038d4f71279c44858e3e2c6870
2451 Author: Wolfgang Denk <wd@pollux.denx.de>
2452 Date: Mon Nov 6 17:06:36 2006 +0100
2454 Sequential accesses to non-existent memory must be synchronized,
2455 at least on G2 cores.
2457 This fixes get_ram_size() problems on MPC5200 Rev. B boards.
2459 commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa
2460 Author: Timur Tabi <timur@freescale.com>
2461 Date: Fri Nov 3 19:15:00 2006 -0600
2463 mpc83xx: Update 83xx to use fsl_i2c.c
2465 Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete
2466 cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
2467 Added multiple I2C bus support to fsl_i2c.c.
2469 Signed-off-by: Timur Tabi <timur@freescale.com>
2471 commit d239d74b1c937984bc519083a8e7de373a390f06
2472 Author: Timur Tabi <timur@freescale.com>
2473 Date: Fri Nov 3 12:00:28 2006 -0600
2475 mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
2477 Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
2478 tree matches the other 8xxx trees.
2480 Signed-off-by: Timur Tabi <timur@freescale.com>
2482 commit f7fb2e703ec9688541416962724adff70a7322cb
2483 Author: Kim Phillips <kim.phillips@freescale.com>
2484 Date: Thu Nov 2 19:47:11 2006 -0600
2486 mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c
2488 commit 90f30a710a3c619b5405860a686c4ddfc495d4b6
2489 Author: Dave Liu <daveliu@freescale.com>
2490 Date: Thu Nov 2 18:05:50 2006 -0600
2492 mpc83xx: Fix the incorrect dcbz operation
2494 The 834x rev1.x silicon has one CPU5 errata.
2496 The issue is when the data cache locked with
2497 HID0[DLOCK], the dcbz instruction looks like no-op inst.
2499 The right behavior of the data cache is when the data cache
2500 Locked with HID0[DLOCK], the dcbz instruction allocates
2503 The 834x rev3.0 and later and 8360 have not this bug inside.
2505 So, when 834x rev3.0/8360 are working with ECC, the dcbz
2506 instruction will corrupt the stack in cache, the processor will
2509 However, the 834x rev1.x can work with ECC with these code,
2510 because the sillicon has this cache bug. The dcbz will not
2511 corrupt the stack in cache.
2512 Really, it is the fault code running on fault sillicon.
2514 This patch fix the incorrect dcbz operation. Instead of
2515 CPU FP writing to initialise the ECC.
2518 * Fix the incorrect dcbz operation instead of CPU FP
2519 writing to initialise the ECC memory. Otherwise, it
2520 will corrupt the stack in cache, The processor will checkstop
2523 Signed-off-by: Dave Liu <daveliu@freescale.com>
2525 commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d
2526 Author: Kim Phillips <kim.phillips@freescale.com>
2527 Date: Wed Nov 1 00:10:40 2006 -0600
2529 mpc83xx: add OF_FLAT_TREE bits to 83xx boards
2531 add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
2532 STDOUT_PATH configuration bits to mpc8349emds,
2533 mpc8349itx, and mpc8360emds board code.
2535 redo environment to use bootm with the fdtaddr
2536 for booting ARCH=powerpc kernels by default,
2537 and provide default fdtaddr values.
2539 commit 48041365b3420589ad464ebc7752e0053538b729
2540 Author: Kim Phillips <kim.phillips@freescale.com>
2541 Date: Wed Nov 1 00:07:25 2006 -0600
2543 mpc83xx: change ft code to modify local-mac-address property
2545 Update 83xx OF code to update local-mac-address properties
2546 for ethernet instead of the obsolete 'address' property.
2548 commit 9ca880a250870a7d55754291b5591d2b5fe89b54
2549 Author: Timur Tabi <timur@freescale.com>
2550 Date: Tue Oct 31 21:23:16 2006 -0600
2552 mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS
2554 This patch also adds an improved I2C set_speed(), which handles all clock
2557 Signed-off-by: Timur Tabi <timur@freescale.com>
2559 commit ac4b5622ce050b5ee1e154b98df630d778661632
2560 Author: Dave Liu <daveliu@freescale.com>
2561 Date: Tue Oct 31 19:54:59 2006 -0600
2563 mpc83xx: add the README.mpc8360emds
2565 add doc/README.mpc8360emds to accompany the new board support
2567 commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef
2568 Author: Dave Liu <daveliu@freescale.com>
2569 Date: Fri Nov 3 12:11:15 2006 -0600
2571 mpc83xx: add QE ethernet support
2573 this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
2575 commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73
2576 Author: Dave Liu <daveliu@freescale.com>
2577 Date: Fri Nov 3 19:33:44 2006 -0600
2579 mpc83xx: Add MPC8360EMDS basic board support
2581 Add support for the Freescale MPC8360EMDS board.
2582 Includes DDR, DUART, Local Bus, PCI.
2584 commit 23892e49352de74f7fac36ff90bb1be143d195e3
2585 Author: Dave Liu <daveliu@freescale.com>
2586 Date: Tue Oct 31 19:30:40 2006 -0600
2588 mpc83xx: add the QUICC Engine (QE) immap file
2590 common QE immap file. Also required for 8360.
2592 commit b701652a4992bdcc62fb1a6038a85beef9e55da4
2593 Author: Dave Liu <daveliu@freescale.com>
2594 Date: Tue Oct 31 19:25:38 2006 -0600
2596 mpc83xx: Add 8360 specifics to 83xx immap
2598 Mainly add QE device dependencies, with appropriate 8360 protection.
2601 commit 988833324a7fda482c8ac3ca23eb539f8232e404
2602 Author: Timur Tabi <timur@freescale.com>
2603 Date: Tue Oct 31 19:14:41 2006 -0600
2605 mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX
2607 PREREQUISITE PATCHES:
2609 * This patch can only be applied after the following patches have been applied:
2611 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2"
2612 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2"
2616 * For the 8349E-mITX, fix some size values in pci_init_board(), enable
2617 the clock for the 2nd USB board (Linux kernel will hang otherwise),
2618 and fix the CONFIG_BOOTARGS macro.
2620 Signed-off-by: Timur Tabi <timur@freescale.com>
2622 commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357
2623 Author: Timur Tabi <timur@freescale.com>
2624 Date: Tue Oct 31 18:44:42 2006 -0600
2626 mpc83xx: Add support for the MPC8349E-mITX
2628 PREREQUISITE PATCHES:
2630 * This patch can only be applied after the following patches have been applied:
2632 1) DNX#2006090742000024 "Add support for multiple I2C buses"
2633 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
2634 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
2635 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
2636 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
2640 * Add support for the Freescale MPC8349E-mITX reference design platform.
2641 The second TSEC (Vitesse 7385 switch) is not supported at this time.
2643 Signed-off-by: Timur Tabi <timur@freescale.com>
2645 commit 183da6d9b446cc12123455844ad1187e2375626f
2646 Author: Ben Warren <bwarren@qstreams.com>
2647 Date: Tue Sep 12 10:15:53 2006 -0400
2649 Additional MPC8349 support for multibus i2c
2653 Here is a patch for a file that was accidentally left out of a previous
2656 It accompanies the patch with ticket DNX#2006090742000024
2659 Change PCI initialization to use new multi-bus I2C API.
2664 commit b24f119d672b709d153ff2ac091d4aa63ec6877d
2665 Author: Ben Warren <bwarren@qstreams.com>
2666 Date: Thu Sep 7 16:51:04 2006 -0400
2668 Multi-bus I2C implementation of MPC834x
2672 Attached is a patch implementing multiple I2C buses on the MPC834x CPU
2673 family and the MPC8349EMDS board in particular.
2674 This patch requires Patch 1 (Add support for multiple I2C buses).
2675 Testing was performed on a 533MHz board.
2677 /*** Note: This patch replaces ticket DNX#2006083042000027 ***/
2679 Signed-off-by: Ben Warren <bwarren@qstreams.com>
2682 Implemented driver-level code to support two I2C buses on the
2683 MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds
2684 are 50kHz, 100kHz and 400kHz on each bus.
2689 commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae
2690 Author: Ben Warren <bwarren@qstreams.com>
2691 Date: Thu Sep 7 16:50:54 2006 -0400
2693 Add support for multiple I2C buses
2697 Attached is a patch providing support for multiple I2C buses at the
2698 command level. The second part of the patch includes an implementation
2699 for the MPC834x CPU and MPC8349EMDS board.
2701 /*** Note: This patch replaces ticket DNX#2006083042000018 ***/
2703 Signed-off-by: Ben Warren <bwarren@qstreams.com>
2707 1. Include new 'i2c' command (based on USB implementation) using
2708 CONFIG_I2C_CMD_TREE.
2710 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that
2711 the commands to change bus number and speed are only available under the
2712 new 'i2c' command mentioned in the first bullet.
2714 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
2715 systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form
2716 of an array of bus-device pairs. Otherwise, it is an array of uchar.
2719 Added new 'i2c' master command for all I2C interaction. This is
2720 conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for
2721 setting I2C bus speed as well as changing the active bus if the board
2722 has more than one (conditionally compiled with
2723 CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses.
2729 commit bed85caf872714ebf53013967a695c9d63acfc68
2730 Author: Timur Tabi <timur@freescale.com>
2731 Date: Tue Oct 31 18:13:36 2006 -0600
2733 mpc83xx: Add support for Errata DDR6 on MPC 834x systems
2737 * Errata DDR6, which affects all current MPC 834x processors, lists changes
2738 required to maintain compatibility with various types of DDR memory. This
2739 patch implements those changes.
2741 Signed-off-by: Timur Tabi <timur@freescale.com>
2743 commit afd6e470f639883002c7c59d562690a5cb0f4865
2744 Author: Timur Tabi <timur@freescale.com>
2745 Date: Wed Oct 25 18:45:23 2006 -0500
2747 mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it
2749 commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a
2750 Author: Timur Tabi <timur@freescale.com>
2751 Date: Tue Aug 22 17:07:00 2006 -0500
2753 mpc83xx: Add support for variable flash memory sizes on 83xx systems
2757 * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
2758 window registers, instead of using a hard-coded value of 8MB.
2760 Signed-off-by: Timur Tabi <timur@freescale.com>
2762 commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965
2763 Author: Tanya Jiang <tanya.jiang@freescale.com>
2764 Date: Thu Aug 3 18:38:13 2006 +0800
2766 mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros
2768 Unified TQM834x variable names with 83xx and consolidated macro
2769 in preparation for the 8360 and other upcoming 83xx devices.
2771 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
2773 commit f6eda7f80ccc13d658020268c507d7173cf2e8aa
2774 Author: Dave Liu <daveliu@freescale.com>
2775 Date: Wed Oct 25 14:41:21 2006 -0500
2777 mpc83xx: Changed to unified mpx83xx names and added common 83xx changes
2779 Incorporated the common unified variable names and the changes in preparation
2780 for releasing mpc8360 patches.
2782 Signed-off-by: Dave Liu <daveliu@freescale.com>
2784 commit 3894c46c27c64891f93ac04edde86a9fa9758d92
2785 Author: Tanya Jiang <tanya.jiang@freescale.com>
2786 Date: Thu Aug 3 18:36:02 2006 +0800
2788 mpc83xx: Fix missing build for mpc8349emds pci.c
2790 Make pci build for mpc8349emds
2792 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
2794 commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219
2795 Author: Tanya Jiang <tanya.jiang@freescale.com>
2796 Date: Thu Aug 3 18:39:49 2006 +0800
2798 mpc83xx: Removed unused file resetvec.S for mpc83xx cpu
2800 Removed unused file resetvec.S for mpc83xx cpu
2802 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
2804 commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf
2805 Author: Nick Spence <Nick.Spence@freescale.com>
2806 Date: Sat Sep 30 00:32:59 2006 -0700
2808 NAND Flash verify across block boundaries
2810 This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is
2812 and the write crosses a block boundary. The pointer to the verification
2813 buffer (bufstart) is not being updated to reflect the starting of the
2815 block so the verification of the second block fails.
2819 * Fix NAND FLASH page verification across block boundaries
2821 commit f484dc791a3932537213c43c654cc1295c64b84c
2822 Author: Nick Spence <nick.spence@freescale.com>
2823 Date: Thu Sep 7 07:39:46 2006 -0700
2825 Added RGMII support to the TSECs and Marvell 881111 Phy
2827 Added a phy initialization to adjust the RGMII RX and TX timing
2828 Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode
2830 Signed-off-by: Nick Spence <nick.spence@freescale.com>
2832 commit c59200443072353044aa4bf737a5a60f9a9af231
2833 Author: Wolfgang Denk <wd@pollux.denx.de>
2834 Date: Thu Nov 2 15:15:01 2006 +0100
2836 Release U-Boot 1.1.6
2838 commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
2839 Author: Bartlomiej Sieka <tur@semihalf.com>
2840 Date: Wed Nov 1 02:04:38 2006 +0100
2842 Finish up support for MarelV38B board
2843 - add watchdog support
2844 - enable GPIO_WKUP_7 pin for input
2847 commit ffa150bc90c943ca265170bd1be3f293674dd5c7
2848 Author: Bartlomiej Sieka <tur@semihalf.com>
2849 Date: Wed Nov 1 01:45:46 2006 +0100
2851 - Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
2852 * remove warnings when compiling ethaddr.c
2853 * adjust linker script (fixes a crash resulting from incorrect
2854 definition of __u_boot_cmd_start)
2855 - Some MarelV38B code cleanup.
2857 commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
2858 Author: Bartlomiej Sieka <tur@semihalf.com>
2859 Date: Wed Nov 1 01:38:16 2006 +0100
2861 - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
2862 MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
2863 Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
2864 MPC5XXX_WU_GPIO_DATA_O for affected boards.
2866 - Add defintions for some MPC5XXX GPIO pins.
2868 commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
2869 Author: Bartlomiej Sieka <tur@semihalf.com>
2870 Date: Wed Nov 1 01:34:29 2006 +0100
2872 Changed MarelV38B board make target to lowercase. Config file cleanup.
2874 commit 1954be6e9c9421b45d0a9d05b10356acc7563150
2875 Author: Wolfgang Denk <wd@pollux.denx.de>
2876 Date: Sun Oct 29 01:03:51 2006 +0200
2878 Automatically adjust ARFLAGS so "make -s" is really silent.
2880 commit fae684e89844856383bdf101440889557df3e6b1
2881 Author: Stefan Roese <sr@denx.de>
2882 Date: Sat Oct 28 16:45:00 2006 +0200
2884 [PATCH] omap925.c: Remove unused functions
2886 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2887 Signed-off-by: Stefan Roese <sr@denx.de>
2889 commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776
2890 Author: Stefan Roese <sr@denx.de>
2891 Date: Sat Oct 28 17:12:58 2006 +0200
2893 [PATCH] Add some missing machtypes for netstar & voiceblue boards
2895 Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
2898 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2899 Signed-off-by: Stefan Roese <sr@denx.de>
2901 commit 856f054410cef52d868feb330168b2a4c4091328
2902 Author: Stefan Roese <sr@denx.de>
2903 Date: Sat Oct 28 15:55:52 2006 +0200
2905 [PATCH] NAND: Partition name support added to NAND subsystem
2907 chpart, nboot and NAND subsystem related commands now accept also partition
2908 name to specify offset.
2910 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2911 Signed-off-by: Stefan Roese <sr@denx.de>
2913 commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6
2914 Author: Wolfgang Denk <wd@pollux.denx.de>
2915 Date: Sat Oct 28 02:29:44 2006 +0200
2919 commit 2751a95abd1b96911081c357e96a12fa97b40dee
2920 Author: Wolfgang Denk <wd@pollux.denx.de>
2921 Date: Sat Oct 28 02:29:14 2006 +0200
2923 Enable commandline editing and hush shell on all TQM boards.
2925 commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
2926 Author: Wolfgang Denk <wd@pollux.denx.de>
2927 Date: Sat Oct 28 02:28:02 2006 +0200
2929 README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
2931 commit 471a7be7a042e95e440f5de969c9765214ae8d6e
2932 Author: Wolfgang Denk <wd@denx.de>
2933 Date: Sat Oct 28 01:14:32 2006 +0200
2935 Check for illegal character '=' in environment variable names.
2937 Make sure the string passed as variable name does not contain a '='
2938 character. This not only prevents the common error or typing
2939 "setenv foo=bar" instead of "setenv foo bar", but (more importantly)
2940 also closes a backdoor which allowed to delete write-protected
2941 environment variables, for example by using "setenv ethaddr=".
2943 commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2
2944 Author: Wolfgang Denk <wd@pollux.denx.de>
2945 Date: Sat Oct 28 00:38:39 2006 +0200
2949 commit e11887a77d81077416a2d1c5e0354916fee8c034
2950 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2951 Date: Thu Oct 26 17:55:31 2006 +0200
2953 Don't pass any debug options directly to the assembler
2955 When passing the -g option to gcc, gcc automatically selects a
2956 suitable --g<format> option to pass on to the assembler.
2957 Thus, there's no point in forcing a specific debug option on the
2958 assembler using the -Wa mechanism.
2960 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2962 commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393
2963 Author: Jon Loeliger <jdl@freescale.com>
2964 Date: Fri Oct 27 07:47:22 2006 -0500
2966 MPC86xx: Cleaned up unused and conditionally used local variables.
2968 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2970 commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9
2971 Author: Wolfgang Denk <wd@pollux.denx.de>
2972 Date: Fri Oct 27 11:55:21 2006 +0200
2974 Fix "ar" flags in some Makefiles to allow for silent "make -s"
2976 commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f
2977 Author: Ben Warren <bwarren@qstreams.com>
2978 Date: Thu Oct 26 14:38:25 2006 -0400
2980 Fix TSEC driver (now for real): avoid crashes if PHY is not attached
2981 to a TSEC (e.g. a switch is connected via RMII) or
2982 if the PHY is defective/incorrectly configured.
2984 Signed-off-by: Ben Warren <bwarren@qstreams.com>
2986 commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999
2987 Author: Ben Warren <bwarren@qstreams.com>
2988 Date: Thu Oct 26 14:38:25 2006 -0400
2990 Fix TSEC driver: avoid crashes if PHY is not attached
2991 to a TSEC (e.g. a switch is connected via RMII) or
2992 if the PHY is defective/incorrectly configured.
2994 Signed-off-by: Ben Warren <bwarren@qstreams.com>
2996 commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6
2997 Author: Wolfgang Denk <wd@pollux.denx.de>
2998 Date: Thu Oct 26 16:24:31 2006 +0200
3002 commit 5e3b0bc19f07ed277d85324ad0427642c8981baf
3003 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
3004 Date: Wed Oct 25 15:48:59 2006 +0200
3006 Finish up support for the ATSTK1000/ATSTK1002 boards
3008 Add atstk1002_config target to Makefile and move the AVR32 section
3009 down below Blackfin so that it doesn't end up in the middle of
3012 Drop the autogenerated linker script thing for now. Will have to
3013 revisit how to handle chips with different flash and RAM layout
3016 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
3018 commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4
3019 Author: Kumar Gala <galak@kernel.crashing.org>
3020 Date: Tue Oct 24 23:47:37 2006 -0500
3022 Added support for Multi-Image files that contain a device tree
3024 If a Multi-Image file contains a third image we try to use it as a
3025 device tree. The device tree image is assumed to be uncompressed in the
3026 image file. We automatically allocate space for the device tree in memory
3027 and provide an 8k pad to allow more than a reasonable amount of growth.
3029 Additionally, a device tree that was contained in flash will now automatically
3030 get copied to system memory as part of boot. Previously an error was
3031 reported if one tried to boot a device tree that was in flash.
3033 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3035 commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512
3036 Author: Wolfgang Denk <wd@denx.de>
3037 Date: Tue Oct 24 21:35:55 2006 +0200
3039 Switch to automatically generated CHANGELOG file.
3040 (use "make CHANGELOG" to update it from time to time)
3042 commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6
3043 Author: Stefan Roese <sr@denx.de>
3044 Date: Tue Oct 24 18:06:48 2006 +0200
3046 Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c
3047 Patch by Stefan Roese, 24 Oct 2006
3049 commit 8ae3b713b2286e0c3213b7802062e4c1599010de
3050 Author: Wolfgang Denk <wd@pollux.denx.de>
3051 Date: Tue Oct 24 17:24:55 2006 +0200
3053 Merge with /home/wd/git/u-boot/master
3055 commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e
3056 Author: Wolfgang Denk <wd@pollux.denx.de>
3057 Date: Tue Oct 24 15:32:57 2006 +0200
3061 commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e
3062 Author: Wolfgang Denk <wd@pollux.denx.de>
3063 Date: Tue Oct 24 14:51:36 2006 +0200
3065 Move atstk1000 files into vendor specific directory.
3066 Patch by Haavard Skinnemoen, 12 Sep 2006
3068 commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37
3069 Author: Wolfgang Denk <wd@pollux.denx.de>
3070 Date: Tue Oct 24 14:42:37 2006 +0200
3072 Add ATSTK1000 and ATSTK1002 board support
3073 Patch by Haavard Skinnemoen, 06 Sep 2006
3075 This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
3078 ATSTK1000 is a full-featured development board for AT32AP CPUs. It
3079 has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
3080 and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
3081 CompactFlash cards. For more information, please see this page:
3083 http://www.atmel.com/dyn/products/tools.asp?family_id=682
3085 The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
3088 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
3090 commit f93ae788c3640fcde5db383471d45548ff4060d0
3091 Author: Wolfgang Denk <wd@pollux.denx.de>
3092 Date: Tue Oct 24 14:31:24 2006 +0200
3094 Add common serial driver for Atmel AT32 and AT91 chips
3095 Patch by Haavard Skinnemoen, 06 Sep 2006
3097 This is a first attempt at creating a common serial driver for Atmel
3098 chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
3099 be possible to support AT91RM9200 and other ARM-based chips with some
3100 minor modifications.
3102 There's nothing fundamentally AVR32-specific in this driver, but it
3103 does use some features which are currently only defined for the
3105 * pm_get_clock_freq: Obtain the clock frequency of a given domain
3106 * gd->console_uart: A "struct device" containing information about
3107 register mappings, gpio resources and clocks associated with the
3110 For more information about these features, please see the "AT32AP
3113 commit 72a087e04705c26cad982879ebd06b5281bf825a
3114 Author: Wolfgang Denk <wd@pollux.denx.de>
3115 Date: Tue Oct 24 14:27:35 2006 +0200
3117 Add AT32AP CPU and AT32AP7000 SoC support
3118 Patch by Haavard Skinnemoen, 06 Sep 2006
3120 This patch adds support for the AT32AP CPU family and the AT32AP7000
3121 chip, which is the first chip implementing the AVR32 architecture.
3123 The AT32AP CPU core is a high-performance implementation featuring a
3124 7-stage pipeline, separate instruction- and data caches, and a MMU.
3125 For more information, please see the "AVR32 AP Technical Reference":
3127 http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
3129 In addition to this, the AT32AP7000 chip comes with a large set of
3130 integrated peripherals, many of which are shared with the AT91 series
3131 of ARM-based microcontrollers from Atmel. Full data sheet is
3134 http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
3136 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
3138 commit 7b64fef33c66be648826c0ff9758298ef13d0604
3139 Author: Wolfgang Denk <wd@pollux.denx.de>
3140 Date: Tue Oct 24 14:21:16 2006 +0200
3142 Add AVR32 architecture support
3143 Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200
3145 This patch adds common infrastructure code for the Atmel AVR32
3146 architecture. See doc/README.AVR32 for details.
3148 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
3150 commit 2da2d9a4766063b9848f3a35ad6025499cf87265
3151 Author: Wolfgang Denk <wd@pollux.denx.de>
3152 Date: Tue Oct 24 13:57:33 2006 +0200
3154 Use -g instead of -gstabs in AFLAGS_DEBUG
3155 Patch by Haavard Skinnemoen, 30 Aug 2006
3157 In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
3158 matter what the target's preferred debugging format is. This patch
3159 simply replaces -gstabs with -g, so that the default debugging format
3160 for the architecture is used.
3162 commit 965829872169c2996023840d98e1d85ad148d629
3163 Author: Wolfgang Denk <wd@pollux.denx.de>
3164 Date: Tue Oct 24 13:55:18 2006 +0200
3166 Fix/workaround broken dependency handling with make 3.81
3167 Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200
3169 commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a
3170 Author: Marian Balakowicz <m8@semihalf.com>
3171 Date: Mon Oct 23 22:17:05 2006 +0200
3173 Fix sequoia separate object direcory building problems.
3175 commit 3dfa9cfdcee78b30da3432318b32821ffabe974b
3176 Author: Jon Loeliger <jdl@freescale.com>
3177 Date: Fri Oct 20 17:16:35 2006 -0500
3179 Use generic I2C register block on 85xx and 86xx.
3181 Replace private IMMAP I2C structures with generic reg block
3182 and allow 86xx to have multiple I2C device busses.
3184 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3186 commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c
3187 Author: Jon Loeliger <jdl@freescale.com>
3188 Date: Fri Oct 20 15:54:34 2006 -0500
3190 Fix compilation warnings on a few 85xx boards.
3192 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3194 commit 2047672684cf85cb6f96a1fbc993180aaaf19a99
3195 Author: Jon Loeliger <jdl@freescale.com>
3196 Date: Fri Oct 20 15:50:15 2006 -0500
3198 Converted all 85xx boards to use a common FSL I2C driver.
3199 Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
3200 And removed hard i2c path from a few u-boot.lds scipts too.
3201 Minor whitespace cleanups along the way.
3203 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3205 commit 4d45f69e362b05892c9e92a7907e5820995612aa
3206 Author: Jon Loeliger <jdl@freescale.com>
3207 Date: Thu Oct 19 12:02:24 2006 -0500
3209 Rewrite a series of goto statements as a sequences of
3210 conditional expressions instead.
3212 Use consistent return code 0/-1 for good/bad indicators.
3214 Include one fewer file if the driver isn't used at all.
3216 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3218 commit 7237c033b02fe295880435f1eb80819a0c987532
3219 Author: Jon Loeliger <jdl@freescale.com>
3220 Date: Thu Oct 19 11:02:16 2006 -0500
3222 Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
3224 in an effort to begin to unify the umpteen FSL I2C drivers that
3225 are all otherwise very similar.
3227 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3229 commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b
3230 Author: Jon Loeliger <jdl@freescale.com>
3231 Date: Thu Oct 19 11:33:52 2006 -0500
3233 * Fix a bunch of compiler warnings for gcc 4.0
3235 Signed-off-by: Matthew McClintock <msm@freescale.com>
3237 commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2
3238 Author: Stefan Roese <sr@denx.de>
3239 Date: Tue Oct 17 06:14:31 2006 +0200
3241 Add monitor functions for indirect access to PPC440 DCR's
3242 Patch by Leonid Baryudin, 12 Oct 2006
3244 commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09
3245 Author: Jon Loeliger <jdl@freescale.com>
3246 Date: Fri Oct 13 16:47:53 2006 -0500
3248 Fixed leading whitespace issues.
3249 Removed spurious LAWAR thing.
3251 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3253 commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391
3254 Author: Jon Loeliger <jdl@freescale.com>
3255 Date: Thu Oct 12 10:42:36 2006 -0500
3257 Remove unneeded include files and local variable.
3259 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3261 commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5
3262 Author: Grant Likely <grant.likely@secretlab.ca>
3263 Date: Tue Oct 10 00:23:32 2006 -0600
3265 Fix possible uninitialized variable compiler warning.
3267 When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
3268 do_bootm_linux() may be uninitialized. There is no possibility in the
3269 current code that len will get used uninitialized, but this fix follows
3270 the existing convention of setting both len and data to zero at the same
3273 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3275 commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e
3276 Author: Matthew McClintock <msm@freescale.com>
3277 Date: Wed Oct 11 15:13:01 2006 -0500
3279 * Fix a bunch of compiler warnings for gcc 4.0
3281 Signed-off-by: Matthew McClintock <msm@freescale.com>
3283 commit bf651baa365e5447246aad6a633ccd667cf24a39
3284 Author: Jon Loeliger <jdl@freescale.com>
3285 Date: Wed Oct 11 10:10:43 2006 -0500
3287 Move "ar" flags to config.mk to allow for silent "make -s"
3289 commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e
3290 Author: Jon Loeliger <jdl@freescale.com>
3291 Date: Tue Oct 10 17:19:03 2006 -0500
3293 Coding style changes to remove local varible blocks
3294 and reformat a bit nicer.
3296 commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a
3297 Author: Jon Loeliger <jdl@freescale.com>
3298 Date: Tue Oct 10 17:16:04 2006 -0500
3300 Fix whitespace issues.
3302 commit 7b382b7125f2397cce63253df62f183e3dfa2770
3303 Author: Jon Loeliger <jdl@freescale.com>
3304 Date: Tue Oct 10 17:14:45 2006 -0500
3306 Fix whitespace issues.
3308 commit e10390ddd736b0dad1528eec4b0fe35c0827139a
3309 Author: Jon Loeliger <jdl@freescale.com>
3310 Date: Tue Oct 10 17:06:53 2006 -0500
3312 Fix whitespace issues.
3314 commit 89875e96ba3f023157bf50d5f8e33bf254964a76
3315 Author: Jon Loeliger <jdl@freescale.com>
3316 Date: Tue Oct 10 17:03:43 2006 -0500
3318 Ran lindent and cleaned up whitespace issues.
3319 Format for 80-columns too.
3321 commit 333961ae7095fc66d8a041fce1ac9ee873b09d86
3322 Author: Jon Loeliger <jdl@freescale.com>
3323 Date: Tue Oct 10 17:02:22 2006 -0500
3325 Fix whitespace and 80-col issues.
3327 commit 5c912cb1c31266c66ca59b36f9b6f87296421d75
3328 Author: Stefan Roese <sr@denx.de>
3329 Date: Sat Oct 7 11:36:51 2006 +0200
3331 CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
3332 Patch by Stefan Roese, 07 Oct 2006
3334 commit 5bc528fa4da751d472397b308137238a6465afd2
3335 Author: Stefan Roese <sr@denx.de>
3336 Date: Sat Oct 7 11:35:25 2006 +0200
3338 Update ALPR code (NAND support working now)
3339 Patch by Stefan Roese, 07 Oct 2006
3341 commit 77d5034847d328753b80c46b83f960a14a26f40e
3342 Author: Stefan Roese <sr@denx.de>
3343 Date: Sat Oct 7 11:33:03 2006 +0200
3345 Remove compile warnings in fpga code
3346 Patch by Stefan Roese, 07 Oct 2006
3348 commit f3443867e90d2979a7dd1c65b0d537777e1f9850
3349 Author: Stefan Roese <sr@denx.de>
3350 Date: Sat Oct 7 11:30:52 2006 +0200
3352 Add CONFIG_BOARD_RESET to configure board specific reset function
3353 Patch by Stefan Roese, 07 Oct 2006
3355 commit f55df18187e7a45cb73fec4370d12135e6691ae1
3356 Author: John Traill <john.traill@freescale.com>
3357 Date: Fri Sep 29 08:23:12 2006 +0100
3359 Fix missing tCycle/modfreq calculation.
3361 Signed-off-by: John Traill <john.traill@freescale.com>
3363 commit 8272dc2f58f2473d8995fcc9b916440cfba080f0
3364 Author: Andy Fleming <afleming@freescale.com>
3365 Date: Wed Sep 13 10:33:35 2006 -0500
3367 Updated config headers to add default FDT-based booting
3369 commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3
3370 Author: Andy Fleming <afleming@freescale.com>
3371 Date: Wed Sep 13 10:34:18 2006 -0500
3373 Add support for eTSEC 3 & 4 on 8548 CDS
3375 * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
3376 This will only work on rev 1.3 boards (but doesn't break older boards)
3377 * Cleaned up some comments to reflect the expanded role of tsec
3380 commit 084d648b109c8984f83674043c1a7fa3885ef801
3381 Author: Andy Fleming <afleming@freescale.com>
3382 Date: Wed Sep 13 10:33:56 2006 -0500
3384 Added code to support 2.6.18 PCI changes in u-boot
3386 * Added code to swizzle the IRQ map for the PCI
3388 commit afbdc649f8751e4f4f1a6f527edfe139773f2c15
3389 Author: Jon Loeliger <jdl@freescale.com>
3390 Date: Tue Sep 19 09:34:10 2006 -0500
3392 Modified makefile for new build mechanism.
3394 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3396 commit d14ba6a798beb753e7a864500414fcc2d198b8bc
3397 Author: Jon Loeliger <jdl@freescale.com>
3398 Date: Thu Sep 14 08:40:36 2006 -0500
3400 Handle 86xx SVR values according to the new Reference Manual.
3401 Both 8641 and 8641D have SVR == 0x8090, and are distinguished
3402 by the byte in bits 16-23 instead.
3403 Thanks to Jason Jin for noticing.
3405 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3407 commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7
3408 Author: Zhang Wei <wei.zhang@freescale.com>
3409 Date: Mon Aug 28 14:25:31 2006 +0800
3411 Fixed an OF-tree off-by-one bug when adding a new property name.
3412 This bug will cause the kernel booting to pause a long time.
3414 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
3415 (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit)
3417 commit 9bff7a69a885adebbd2bd45990494ec4cf998a30
3418 Author: Jon Loeliger <jdl@freescale.com>
3419 Date: Tue Aug 29 11:05:09 2006 -0500
3421 Remove trailing empty lines.
3423 commit cd6d73d5b895a5935ac4fde0a356288142a584e0
3424 Author: Jon Loeliger <jdl@freescale.com>
3425 Date: Tue Aug 29 09:48:49 2006 -0500
3427 Remove bogus msync and use volatile asm.
3429 commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e
3430 Author: Jon Loeliger <jdl@freescale.com>
3431 Date: Tue Aug 29 08:17:14 2006 -0500
3433 Add myself as maintainer for MPC8641HPCN.
3435 commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d
3436 Author: Zhang Wei <wei.zhang@freescale.com>
3437 Date: Mon Aug 28 14:25:31 2006 +0800
3439 Fixed an OF-tree off-by-one bug when adding a new property name.
3440 This bug will cause the kernel booting to pause a long time.
3442 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
3444 commit 5567806b67d0ae83493aa8823ad3b6c914f581d7
3445 Author: Haiying Wang <haiying.wang@freescale.com>
3446 Date: Fri Aug 25 14:38:34 2006 -0400
3448 Change ramdiskaddr and dtbaddr
3449 Remove PEX fluff commands.
3451 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
3452 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3454 commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e
3455 Author: Matthew McClintock <msm@freescale.com>
3456 Date: Wed Aug 23 13:32:45 2006 -0500
3458 * Another small fix for booting with disable_of
3460 Signed-off-by: Matthew McClintock <msm@freescale.com>
3462 commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c
3463 Author: Jon Loeliger <jdl@freescale.com>
3464 Date: Wed Aug 23 11:04:43 2006 -0500
3466 Cleanup and lindent new AHCI driver.
3468 commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de
3469 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
3470 Date: Wed Aug 23 19:15:12 2006 +0800
3472 Add AHCI define and sata support for MPC8641HPCN board.
3474 Signed-off-by:Jason Jin<jason.jin@freescale.com>
3476 commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4
3477 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
3478 Date: Wed Aug 23 19:10:44 2006 +0800
3480 Add AHCI support to u-boot
3482 Add AHCI support in u-boot, enable the sata disk controllers which
3483 following the AHCI protocol.
3485 Signed-off-by:Jason Jin<jason.jin@freescale.com>
3487 commit d8ea2acf5f137cae99417df4f573d036ee384668
3488 Author: Zhang Wei <wei.zhang@freescale.com>
3489 Date: Wed Aug 23 17:54:32 2006 +0800
3491 Add dtb boot-up parameter to default boot commands.
3493 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
3495 commit b93775c2036b99baa390ea425c4771895bbc63c4
3496 Author: Jon Loeliger <jdl@freescale.com>
3497 Date: Tue Aug 22 18:26:08 2006 -0500
3499 Cleanup even more poorly introduced whitespace.
3501 commit ae6241685cbcf0c79a3636530d2ceab1fb291a94
3502 Author: Jon Loeliger <jdl@freescale.com>
3503 Date: Tue Aug 22 18:07:00 2006 -0500
3505 Cleanup more poorly introduced whitespace.
3507 commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57
3508 Author: Jon Loeliger <jdl@freescale.com>
3509 Date: Tue Aug 22 17:54:05 2006 -0500
3511 Cleanup poorly introduced whitespace.
3513 commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3
3514 Author: Jon Loeliger <jdl@freescale.com>
3515 Date: Tue Aug 22 12:25:27 2006 -0500
3517 General indent and whitespace cleanups.
3519 commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f
3520 Author: Jon Loeliger <jdl@freescale.com>
3521 Date: Tue Aug 22 12:06:18 2006 -0500
3523 General indent and whitespace cleanups.
3525 commit 41a0e8b304d3ff55fe27a230507aac79684016ac
3526 Author: Jon Loeliger <jdl@freescale.com>
3527 Date: Tue Aug 22 10:42:21 2006 -0500
3529 Cleanup compiler warnings.
3531 commit 5de62c47a8628b3da4d73f7c07027f32a3342d40
3532 Author: Matthew McClintock <msm@freescale.com>
3533 Date: Tue Aug 22 09:31:59 2006 -0500
3535 Fix disable_of booting
3537 Signed-off-by: Matthew McClintock <msm@freescale.com>
3539 commit 87a449c8ac396420cb24260f717ea9e6faa82047
3540 Author: Matthew McClintock <msm@freescale.com>
3541 Date: Tue Aug 22 09:23:55 2006 -0500
3543 Support for FDT in uImage format, error when using FDT from flash
3545 Signed-off-by: Matthew McClintock <msm@freescale.com>
3547 commit 75c299c38369d01addd5e054b8a16217b70f4a86
3548 Author: Haiying Wang <haiying.wang@freescale.com>
3549 Date: Tue Aug 15 15:12:55 2006 -0400
3551 Unlock cache before kernel starts up for MPC86xx
3553 commit 67256678f00c09b0a7f19e862e5c1847553d31bc
3554 Author: Haiying Wang <haiying.wang@freescale.com>
3555 Date: Tue Aug 15 15:13:15 2006 -0400
3557 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
3559 commit 1c8f6d8fb028f156094d05f2d14298e6479364ac
3560 Author: Haiying Wang <haiying.wang@freescale.com>
3561 Date: Tue Aug 15 15:12:55 2006 -0400
3563 Unlock cache before kernel starts up for MPC86xx
3565 commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04
3566 Author: Haiying Wang <haiying.wang@freescale.com>
3567 Date: Tue Aug 15 15:13:15 2006 -0400
3569 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
3571 commit 86c8e17f25e972a7e272950a0735fad84e082b88
3572 Author: Matthew McClintock <msm@freescale.com>
3573 Date: Wed Aug 16 13:59:47 2006 -0500
3575 * Fix disable_of booting
3577 Signed-off-by: Matthew McClintock <msm@freescale.com>
3579 commit 25c751e9adc86e22fe3b5b47cf2806379b575db7
3580 Author: Matthew McClintock <msm@freescale.com>
3581 Date: Wed Aug 16 10:54:09 2006 -0500
3583 * Support for FDT in uImage format, error when using FDT from flash
3585 Signed-off-by: Matthew McClintock <msm@freescale.com>
3587 commit 899620c2d66d4eef3b2a0034d062e71d45d886c9
3588 Author: Stefan Roese <sr@denx.de>
3589 Date: Tue Aug 15 14:22:35 2006 +0200
3591 Add initial support for the ALPR board from Prodrive
3592 NAND needs some additional testing
3593 Patch by Heiko Schocher, 15 Aug 2006
3595 commit f0ff4692ff3372dec55074a8eb444943ab095abb
3596 Author: Stefan Roese <sr@denx.de>
3597 Date: Tue Aug 15 14:15:51 2006 +0200
3599 Add FPGA Altera Cyclone 2 support
3600 Patch by Heiko Schocher, 15 Aug 2006
3602 commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
3603 Author: Jon Loeliger <jdl@freescale.com>
3604 Date: Mon Aug 14 15:33:38 2006 -0500
3606 Fix BAT0 to actually be cacheable, non-guarded as documented.
3608 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3610 commit 40bc83559db5745681909fd7382ae509567e116d
3611 Author: Jon Loeliger <jdl@freescale.com>
3612 Date: Wed Aug 9 15:32:16 2006 -0500
3614 Removed MPC8641HPCN DTS source file from build.
3615 It is no longer linked into U-Boot; its sources are
3616 now located in the kernel tree.
3618 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3620 commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb
3621 Author: Matthew McClintock <msm@freescale.com>
3622 Date: Wed Jun 28 10:47:03 2006 -0500
3624 * Switched default PCI speed for 8540 ADS back to 33MHz
3626 * Added comments and a printf to warn that PCI-X won't
3628 Patch by Andy Fleming 17-Mar-2006
3630 Signed-off-by: Andy Fleming <afleming@freescale.com>
3632 commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39
3633 Author: Matthew McClintock <msm@freescale.com>
3634 Date: Wed Jun 28 10:46:35 2006 -0500
3636 * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006
3638 Signed-off-by: Andy Fleming <afleming@freescale.com>
3640 commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452
3641 Author: Matthew McClintock <msm@freescale.com>
3642 Date: Wed Jun 28 10:46:13 2006 -0500
3644 * Added VIA configuration table
3646 * Added support for PCI2 on CDS
3647 Patch by Andy Fleming 17-Mar-2006
3649 Signed-off-by: Andy Fleming <afleming@freescale.com>
3651 commit c88f9fe66b64247e5b6a38410ba315ca25596d16
3652 Author: Matthew McClintock <msm@freescale.com>
3653 Date: Wed Jun 28 10:45:41 2006 -0500
3655 * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
3657 Signed-off-by: Andy Fleming <afleming@freescale.com>
3659 commit 97074ed9655309b64231bc2cee69fe85399f8055
3660 Author: Matthew McClintock <msm@freescale.com>
3661 Date: Wed Jun 28 10:45:17 2006 -0500
3663 * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006
3665 Signed-off-by: Andy Fleming <afleming@freescale.com>
3667 commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2
3668 Author: Matthew McClintock <msm@freescale.com>
3669 Date: Wed Jun 28 10:44:49 2006 -0500
3671 * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
3673 Signed-off-by: Andy Fleming <afleming@freescale.com>
3675 commit a4e11558b810ef2cddffdf7b9d86bc1130441960
3676 Author: Matthew McClintock <msm@freescale.com>
3677 Date: Wed Jun 28 10:44:23 2006 -0500
3679 * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006
3681 Signed-off-by: Andy Fleming <afleming@freescale.com>
3683 commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b
3684 Author: Matthew McClintock <msm@freescale.com>
3685 Date: Wed Jun 28 10:43:36 2006 -0500
3687 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
3689 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3691 commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4
3692 Author: Matthew McClintock <msm@freescale.com>
3693 Date: Wed Jun 28 10:43:00 2006 -0500
3695 * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006
3697 commit 5498d90312aad9f6bdbf047986027c35b03cd163
3698 Author: Matthew McClintock <msm@freescale.com>
3699 Date: Wed Jun 28 10:42:24 2006 -0500
3701 * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006
3703 commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe
3704 Author: Matthew McClintock <msm@freescale.com>
3705 Date: Wed Jun 28 10:41:37 2006 -0500
3707 * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006
3709 commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a
3710 Author: John Traill <john.traill@freescale.com>
3711 Date: Wed Aug 9 14:33:50 2006 +0100
3713 Add Rapidio support for the MPC8641HPCN
3715 Signed-off-by: John Traill <john.traill@freescale.com>
3717 commit 91a414c7d1fb0eac912592cd995b30c9f23045c9
3718 Author: John Traill <john.traill@freescale.com>
3719 Date: Tue Aug 8 11:32:43 2006 +0100
3721 Fix caslat calculation
3723 Signed-off-by: John Traill <john.traill@freescale.com>
3725 commit 709d3073e74153278e7904a70819bbef7df50e1a
3726 Author: Jon Loeliger <jdl@freescale.com>
3727 Date: Thu Aug 3 16:17:56 2006 -0500
3729 Convert to mac-address in ethernet nodes.
3731 commit 71748af833ca1017edf1415be376366ff2937d17
3732 Author: Haiying Wang <haiying.wang@freescale.com>
3733 Date: Fri Jul 28 12:41:35 2006 -0400
3735 Correct the irq value of DUART2
3737 commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c
3738 Author: Haiying Wang <haiying.wang@freescale.com>
3739 Date: Fri Jul 28 12:41:41 2006 -0400
3741 Change the space size of PEX IO in README
3743 commit 239db37c94f7a92941c4465feceb867c609241c5
3744 Author: Haiying Wang <haiying.wang@freescale.com>
3745 Date: Fri Jul 28 12:41:18 2006 -0400
3747 Move get_board_sys_clk to board directory
3749 commit 492900b985439fbce1a118afde1e35def870db03
3750 Author: John Traill <john.traill@freescale.com>
3751 Date: Fri Jul 28 09:03:54 2006 +0100
3753 Fix 8641HPCN pollution
3755 commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2
3756 Author: John Traill <john.traill@freescale.com>
3757 Date: Fri Jul 28 08:16:06 2006 +0100
3759 Fix 8641HPCN timebase
3761 commit c86360b830f1eecd7a72208575dde4f57879faea
3762 Author: Zhang Wei <wei.zhang@freescale.com>
3763 Date: Fri Jul 28 00:01:34 2006 +0800
3765 Fixed OF device tree of mpc86xxhpcn board.
3767 The changes works in with kernel irq mapping rework.
3769 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
3771 commit bea3f28d285942bf3f7ab339ce85178ded544225
3772 Author: Haiying Wang <haiying.wang@freescale.com>
3773 Date: Wed Jul 12 10:48:05 2006 -0400
3775 Add support for reading and writing mac addresses to or from ID EEPROM.
3777 Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
3778 With attached patch, we can use command "mac/mac read/mac save/"
3779 to read and write EEPROM under u-boot prompt.
3781 U-boot will calculate the checksum of EEPROM while bootup,
3782 if it is right, then u-boot will check whether the mac address
3783 of eTSEC0/1/2/3 is availalbe (non-zero).
3785 If there is mac address availabe in EEPROM, u-boot will use it,
3786 otherewise, u-boot will use the mac address defined in
3787 MPC8641HPCN.h. This matches the requirement to set unique mac address
3790 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
3791 Signed-off-by: York Sun <yorksun@freescale.com>
3793 commit fcb28e763415e0e4e66b0f45842d1557ae198e5e
3794 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
3795 Date: Thu Jul 13 10:35:10 2006 -0500
3797 Fixed initrd issue by define big RAM
3799 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
3801 commit e6cd2a1785d74ec3d30a86f1cb360be8de478151
3802 Author: Jason Jin <Jason.jin@freescale.com>
3803 Date: Fri Jul 7 10:01:45 2006 -0500
3805 We made a u-boot patch to fix the hang up issue
3806 when booting filesystem from ramdisk.
3808 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
3810 commit 38433ccc5850ee70549af0b2bc5b920355ef5388
3811 Author: Matthew McClintock <msm@freescale.com>
3812 Date: Wed Jun 28 10:47:03 2006 -0500
3814 * Switched default PCI speed for 8540 ADS back to 33MHz
3815 * Added comments and a printf to warn that PCI-X won't
3817 Patch by Andy Fleming 17-Mar-2006
3819 Signed-off-by: Andy Fleming <afleming@freescale.com>
3821 commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19
3822 Author: Matthew McClintock <msm@freescale.com>
3823 Date: Wed Jun 28 10:46:35 2006 -0500
3825 * Fixed a bug where 8555 PCI code used the old variable and
3827 Patch by Andy Fleming 17-Mar-2006
3829 Signed-off-by: Andy Fleming <afleming@freescale.com>
3831 commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac
3832 Author: Matthew McClintock <msm@freescale.com>
3833 Date: Wed Jun 28 10:46:13 2006 -0500
3835 * Added VIA configuration table
3836 * Added support for PCI2 on CDS
3837 Patch by Andy Fleming 17-Mar-2006
3839 Signed-off-by: Andy Fleming <afleming@freescale.com>
3841 commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc
3842 Author: Matthew McClintock <msm@freescale.com>
3843 Date: Wed Jun 28 10:45:41 2006 -0500
3845 * Fixed PCI memory definitions
3846 Patch by Andy Fleming 17-Mar-2006
3848 Signed-off-by: Andy Fleming <afleming@freescale.com>
3850 commit 087454609e47295443af793a282cddcd91a5f49c
3851 Author: Matthew McClintock <msm@freescale.com>
3852 Date: Wed Jun 28 10:45:17 2006 -0500
3854 * Added support for initializing second PCI bus on 85xx
3855 Patch by Andy Fleming 17-Mar-2006
3857 Signed-off-by: Andy Fleming <afleming@freescale.com>
3859 commit b636aaeb6fd516a442fb611bbeeddf3077a687fb
3860 Author: Matthew McClintock <msm@freescale.com>
3861 Date: Wed Jun 28 10:44:49 2006 -0500
3863 * Added PCI-X #defines for PCI-X initialization
3864 Patch by Andy Fleming on 17-Mar-2006
3866 Signed-off-by: Andy Fleming <afleming@freescale.com>
3868 commit 20abbc6fffa115690107cc942c7abf84bdc03a1b
3869 Author: Matthew McClintock <msm@freescale.com>
3870 Date: Wed Jun 28 10:44:23 2006 -0500
3872 * Made sure the code which disables prefetch for PCI devices
3873 sets the size of the prefetch region to 0
3874 Patch by Andy Fleming on 17-Mar-2006
3876 Signed-off-by: Andy Fleming <afleming@freescale.com>
3878 commit 40d5fa35d02df22580593bf0039ab173367e8ef0
3879 Author: Matthew McClintock <msm@freescale.com>
3880 Date: Wed Jun 28 10:43:36 2006 -0500
3882 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
3883 Patch by Jon Loeliger 17-Jan-2006
3885 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3887 commit be7e8b0cb5a0c49dc180075b96df296a893bf146
3888 Author: Matthew McClintock <msm@freescale.com>
3889 Date: Wed Jun 28 10:43:00 2006 -0500
3891 * Removed the oftree.dts for stxxtx in light of the changes
3892 to the flat device tree handling code
3893 Patch by Matthew McClintock 26-June-2006
3895 commit 1b380ec225665e73959677f3893dc658c5925e05
3896 Author: Matthew McClintock <msm@freescale.com>
3897 Date: Wed Jun 28 10:42:24 2006 -0500
3899 * Patch to modify ft_build.c to update flat device trees in place
3900 Patch by Matthew McClintock 26-June-2006
3902 commit 98a9c4d468a942a09ebe8979bec508017f3e4462
3903 Author: Matthew McClintock <msm@freescale.com>
3904 Date: Wed Jun 28 10:41:37 2006 -0500
3906 * Modify bootm command to support booting with flat device trees
3907 Patch by Matthew McClintock 26-June-2006
3909 commit da012ab661fd4ab169dd7b9b32201a4df62cf34a
3910 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
3911 Date: Wed Jun 28 08:43:56 2006 -0500
3913 Change Id to symbolic name for RTL8139
3915 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
3917 commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0
3918 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
3919 Date: Tue Jun 27 18:12:10 2006 +0800
3921 Fix RTL8139 in big endian
3923 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
3924 signed-off-by: Wei Zhang <wei.zhang@freescale.com>
3926 commit fcfb9a57947fc203b99fe81ab0578f7286261f9f
3927 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
3928 Date: Tue Jun 27 18:12:23 2006 +0800
3930 Fix Tsec bug when no link
3932 When tftp a non-exist file from the tftp server, u-boot will check
3933 the link of all eth port. The original file will return wrong link
3934 state on the no link ports.
3936 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
3938 commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2
3939 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
3940 Date: Tue Jun 27 18:12:02 2006 +0800
3942 Fix bug for io_bar size during pci scan
3944 During the pci scan process, Some devices return bar_reponse with the
3945 highest bytes 0, such as the pci bridge in uli1575 return bar_response
3946 with 0xffffff, So the bar_size should be manually set under 64K.
3948 Signed-off-by: Jason Jin <jason.jin@freescale.com>
3950 commit fa7db9c377bc2353a17bf1d381d65a6c418728f0
3951 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
3952 Date: Tue Jun 27 18:11:54 2006 +0800
3954 Enable PCIE1 for MPC8641HPCN board
3956 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
3958 commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
3959 Author: Jon Loeliger <jdl@freescale.com>
3960 Date: Thu Jun 22 08:51:46 2006 -0500
3962 Fix bug in 8641hpcn reset command with no args.
3964 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
3965 Acked-by: Jon Loeliger <jdl@freescale.com>
3967 commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc
3968 Author: Zhang Wei <wei.zhang@freescale.com>
3969 Date: Tue Jun 20 17:47:15 2006 +0800
3971 Reworked IRQ mapping in OF-tree.
3973 commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c
3974 Author: Jon Loeliger <jdl@freescale.com>
3975 Date: Thu Jun 15 21:33:37 2006 -0500
3977 Do not enable address translation on secondary CPUs.
3978 Do not set up BATs on secondary CPUs. Let Linux do the nasty.
3980 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3982 commit 8ecc971618f56029ad99d3516f8b297a6ed58971
3983 Author: Jon Loeliger <jdl@jdl.com>
3984 Date: Wed Jun 7 10:53:55 2006 -0500
3986 Fix a get_board_sys_clk() use-before-def warning.
3988 Signed-off-by: Jon Loeliger <jdl@jdl.com>
3990 commit d9bf4858fca5aa4d651b283270f77da72ebadfd5
3991 Author: Jon Loeliger <jdl@jdl.com>
3992 Date: Wed Jun 7 10:52:49 2006 -0500
3994 Allow DTC path to be passed in.
3996 Signed-off-by: Jon Loeliger <jdl@jdl.com>
3998 commit c83ae9ea6d93abbe751bf8a3396236a084e56f87
3999 Author: Haiying Wang <haiying.wang@freescale.com>
4000 Date: Tue Jun 6 16:54:29 2006 -0400
4002 Modify the IRQ of DUART2
4004 commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e
4005 Author: Jon Loeliger <jdl@jdl.com>
4006 Date: Wed May 31 13:55:35 2006 -0500
4010 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4012 commit cb5965fb95b77a49f4e6af95248e0c849f4af03e
4013 Author: Jon Loeliger <jdl@jdl.com>
4014 Date: Wed May 31 12:44:44 2006 -0500
4016 White space cleanup.
4017 Some 80-column cleanups.
4018 Convert printf() to puts() where possible.
4019 Use #include "spd_sdram.h" as needed.
4020 Enhanced reset command usage message a bit.
4022 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4024 commit 3d5c5be547445dd3bd2eb7368d80df03ea437970
4025 Author: Jon Loeliger <jdl@jdl.com>
4026 Date: Wed May 31 11:39:34 2006 -0500
4028 Removed unneeded local_bus_init() from 8641HPCN board.
4030 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4032 commit 4d3d729c16c392d2982d3266b659d333c927697d
4033 Author: Jon Loeliger <jdl@jdl.com>
4034 Date: Wed May 31 11:24:28 2006 -0500
4036 Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
4038 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4040 commit b2a941de060350ad15878d8219825f4950e9bb8e
4041 Author: Jon Loeliger <jdl@jdl.com>
4042 Date: Wed May 31 10:07:28 2006 -0500
4044 Remove dead debug code.
4046 Signed-off-by: Jon Loeliger <jdl@jdl.com>
4048 commit 126aa70f10ba3d20e0a6f4d32328250513b77770
4049 Author: Jon Loeliger <jdl@freescale.com>
4050 Date: Tue May 30 17:47:00 2006 -0500
4052 Move mpc86xx PIXIS code to board directory
4054 First cut at moving the PIXIS platform code out of
4055 the 86xx cpu directory and into board/mpc8641hpcn
4058 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4060 commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
4061 Author: Haiying Wang <Haiying.Wang@freescale.com>
4062 Date: Tue May 30 09:10:32 2006 -0500
4064 Improve "reset" command's interaction with watchdog.
4066 "reset altbank" will reset another bank WITHOUT watch dog timer enabled
4067 "reset altbank wd" will reset another bank WITH watch dog enabled
4068 "diswd" will disable watch dog after u-boot boots up successfully
4070 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
4072 commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a
4073 Author: Haiying Wang <Haiying.Wang@freescale.com>
4074 Date: Tue May 30 08:51:19 2006 -0500
4076 Fix two SDRAM setup bugs.
4079 Enable 1T/2T based on number of DIMMs present.
4081 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
4083 commit d11fec5015334deb2010e36ce00bb118cc5429a5
4084 Author: Haiying Wang <Haiying.Wang@freescale.com>
4085 Date: Fri May 26 10:24:48 2006 -0500
4087 Add first draft of the MPC8641HPCN doc/README.
4089 Signed-off-by: Jon Loeliger <jdl@jdl.com>
4091 commit ed45d6c930b5939718a87ee12e25cf9a05978d4a
4092 Author: Haiying Wang <Haiying.Wang@freescale.com>
4093 Date: Fri May 26 10:13:04 2006 -0500
4095 Added pci@8000 block.
4096 Updated ethernet interrupt mappings (moved up 48).
4097 Cleaned up a few comments.
4099 Signed-off-by: Jon Loeliger <jdl@jdl.com>
4101 commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7
4102 Author: Haiying Wang <Haiying.Wang@freescale.com>
4103 Date: Fri May 26 10:01:16 2006 -0500
4105 Allow args on reset command.
4107 Signed-off-by: Jon Loeliger <jdl@jdl.com>
4109 commit 14e37081ff3cac7ebe6e93836523429853b6b292
4110 Author: Jon Loeliger <jdl@jdl.com>
4111 Date: Fri May 19 13:28:39 2006 -0500
4113 Change arbitration to round-robin for SMP linux.
4115 commit 9a655876e5995be80f49054e2509500e871e4d3a
4116 Author: Jon Loeliger <jdl@jdl.com>
4117 Date: Fri May 19 13:26:34 2006 -0500
4119 Enable dual DDR controllers and interleaving.
4121 commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c
4122 Author: Jon Loeliger <jdl@jdl.com>
4123 Date: Fri May 19 13:22:44 2006 -0500
4125 Update 86xx address map and LAWBARs.
4127 commit cccce5d0581bb0ba4602799a4b5112e58d1579cb
4128 Author: Jon Loeliger <jdl@jdl.com>
4129 Date: Fri May 19 13:14:15 2006 -0500
4131 Remove L2 Cache invalidate polling.
4133 commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8
4134 Author: Jon Loeliger <jdl@jdl.com>
4135 Date: Fri May 19 12:33:09 2006 -0500
4137 Enable 2nd CPU and I2C.
4139 commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54
4140 Author: Jon Loeliger <jdl@freescale.com>
4141 Date: Mon May 15 07:26:56 2006 -0500
4143 Update interrupt mapping.
4145 commit 6cfea33477b04b63ed47386ed1629529484c33ba
4146 Author: Haiying Wang <Haiying.Wang@freescale.com>
4147 Date: Wed May 10 09:38:06 2006 -0500
4149 Remove unneeded INIT_RAM_LOCK cache twiddling.
4150 Correctly tracks r29 as global data pointer now.
4152 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
4154 commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c
4155 Author: Jon Loeliger <jdl@freescale.com>
4156 Date: Wed May 10 09:33:07 2006 -0500
4158 Remove unnecessary flash.c file.
4160 commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8
4161 Author: Jon Loeliger <jdl@freescale.com>
4162 Date: Tue May 9 08:23:49 2006 -0500
4164 Get MPC8641HPCN flash images working.
4166 Enable the CFI driver.
4167 Remove bogus LAWBAR7 cruft.
4168 Use correct TEXT_BASE, Fixup load script.
4169 Enable SPD EEPROM during DDR setup.
4170 Use generic RFC 1918 IP addresses by default.
4172 commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca
4173 Author: Jon Loeliger <jdl@freescale.com>
4174 Date: Thu Apr 27 10:15:16 2006 -0500
4176 Cleanup whitespaces and style issues.
4177 Removed //-style comments.
4178 Use 80-column lines.
4179 Remove trailing whitespace.
4180 Remove dead code and debug cruft.
4182 commit a2320a6bf8113a09544c42d160d10ac69d049a03
4183 Author: Jon Loeliger <jdl@freescale.com>
4184 Date: Thu Apr 27 08:22:39 2006 -0500
4186 Revert bad PCI prefetch limit change.
4188 commit debb7354d1ea4f694154818df5e5b523f5c1cc1d
4189 Author: Jon Loeliger <jdl@freescale.com>
4190 Date: Wed Apr 26 17:58:56 2006 -0500
4192 Initial support for MPC8641 HPCN board.